owners manual Skoda Octavia

all ratings: 0 average rating: 5

20A5Facelift.book Page 199 Saturday, September 6, 2008 2:13 PM Intelligent Technology 199 Tyre inflation pressure-control system* • Press button  ⇒fig.199 for more than 2 seconds. While pressing the button, the warning light  lights up. At the same time the memory of the system is erased and the new calibration is started, which is confirmed with an audible signal and then the warning light  goes out. • If the warning light  does not go out after the basic setting, there is a fault in the system. Have the vehicle inspected by your nearest specialist garage. Warning light  lights up If the tyre inflation pressure of at least on e wheel is insufficiently inflated in compar- ison to the stored basic value, the warning light  ⇒ lights up. Fig. 199 Button for setting Warning light  flashes the tyre inflation pressure control value If the warning light flashes, there is a system fault. Have the vehicle inspected by your nearest specialist garage. The tyre inflation pressure-control system compares with the aid of the ABS sensors the speed and also the rolling circumference of the individual wheels. If the rolling WARNING circumference of a wheel is changed, the warning light  lights up in the instru-• When the warning light  lights up, immediately reduce the speed and ment cluster ⇒ page 38 and an audible signal sound s. The rolling circumference of avoid sudden steering and brake manoeuvres. Please stop the vehicle the tyre can change if: without delay at the nearest possible stop and inspect the tyres and their • the tyre inflation pressure is too low, inflation pressures. • the structure of the tyre is damaged, • The driver is responsible for the correct tyre inflation pressures. For this • the vehicle is loaded on one side, reason, the tyre inflation pressures must be checked regularly. • the wheels of an axle are loaded heavily (e.g. when towing a trailer or when • Under certain circumstances (e.g. sporty style of driving, wintry or driving uphill or downhill), unpaved roads) the warning light  can be delayed or does not light up at • snow chains are mounted, all. • the temporary spare wheel is mounted, • The tyre inflation pressure-control system does not take away the • one wheel per axle was changed. responsability from the driver for the correct tyre inflation pressure. Basic setting of tyre inflation pressure-control system Note After changing the tyre inflation pressures or after changing one or several wheels, The tyre inflation pressure-control system: a basic setting of the system must be carried out as follows.• does not replace the regular tyre inflation pressure control, because the system • Inflate all tyres to the specified inflation pressure ⇒ page 237.cannot detect an even pressure loss, • Switch on the ignition. Using the system Safety Driving Tips General Maintenance Breakdown assistance Technical Data

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders