or
owners manual Jeep Grand Cherokee
owners manual Jeep Grand Cherokee - year of production: 2013 - Jeep Grand Cherokee WK2 WH2 owners manual EN
Document:
pdf (3.08 MB) 472 pages
all ratings: 0
average rating: 5
text version of content this owner's manual page
from owners manual to the vehicle Jeep Grand Cherokee, year of production 2013:
To Arm The System • Push the LOCK button on the Remote Key-To Disarm The System
Follow these steps to arm the security alarm:less Entry (RKE) Key Fob.The Vehicle Security Alarm can be disarmed
1. Remove the key from the ignition system3. If any doors are open, close them.using any of the following methods:
(refer to "Starting Procedures" in "StartingNOTE:• Push the UNLOCK button on the Remote
And Operating" for further information). Keyless Entry (RKE) Key Fob.
• For vehicles equipped with Keyless Enter-N-• Once the security system is armed, it• GraspthePassiveEntryUnlockDoorHandle
remainsinthatstateuntilyoudisarmitby(if equipped, refer to "Keyless Enter-N-Go" in
Go, make sure the vehicle ignition system isfollowing either of the disarming proce-"Things To Know Before Starting Your Ve-
"OFF." dures described. If a power loss occurshicle" for further information).
•ForvehiclesnotequippedwithKeylessEnter-after arming the system, you must disarm
N-Go, make sure the vehicle ignition system isthe system after restoring power to pre-• Cycle the vehicle ignition system out of the
"OFF" and the key is physically removed fromvent alarm activation.OFFposition.
the ignition. • The ultrasonic intrusion sensor (motion•Forvehicles equipped with Keyless Enter-
2. Perform one of the following methods to lockdetector) actively monitors your vehicleN-Go, push the Keyless Enter-N-Go Start/
everytimeyouarmthesecuritysystem.IfStop button (requires at least one valid
the vehicle: youprefer, you can turn off the ultrasonicKey Fob in the vehicle).
• Push LOCK on the interior power door lockintrusion sensor when arming the secu-•For vehicles not equipped with Keyless
switch with the driver and/or passenger doorrity system. To do so, push the LOCKEnter-N-Go, insert a valid key into the
open. button on the RKE Key Fob three timesignition switch and turn the key to the ON
•PushtheLOCKbuttonontheexteriorPassivewithin 15 seconds of arming the systemposition.
Entry Door Handle with a valid Key Fob avail-(while the Vehicle Security Light is flash-NOTE:
ableinthesameexteriorzone(referto"Keylessing rapidly).
Enter-N-Go"in"ThingsToKnowBeforeStarting • The driver’s door key cylinder and the
Your Vehicle" for further information). liftgate button on the RKEKeyFobcannot
armordisarmtheVehicleSecurityAlarm.
16
Download PDF
Click here to download a pdf file with an instruction manual for Jeep Grand Cherokee
year of production from: 2013
Do you prefer pdf format?
Find out how to download
Enter the code to download PDF file:
All pages in one PDF file!
How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.
:
Jeep Grand Cherokee WK2 WH2 owners manual
pages 17 - 23
Jeep Grand Cherokee WK2 WH2 owners manual
page 20 / 472
this site is maintained by advertising - for view instructions, turn off ad blocking in your browser
Download PDF