owners manual Hyundai Santa Fe

all ratings: 0 average rating: 5

CORROSION PREVENTION AND APPEARANCE CARE 4 4 E030C01A-AAT To clean whitewall tires, use a stiff brush orIf you find any nicks or scratches in the paint, Polishing and Waxing soapy steel-wool scouring pad. use touch-up paint to cover them to prevent corrosion. To protect the paintwork of the car Always wash and dry the car before polishing To clean plastic wheel covers, use a cleanagainst corrosion, you must clean your Hyundai or waxing or using a combination cleaner and sponge or soft cloth and water. (at least once a month). Give special attention wax. Use a good quality commercial product to the removal of salt, mud and other sub- and follow the manufacturer's directions on the To clean cast aluminum alloy wheels, use a mild stances on the underside of the splashboards container. Polish and wax the bright trim pieces soap or neutral detergent. Do not use abrasive of the car. Make sure that the outlets and the as well as the paint. cleaners. Protect the bare-metal surfaces byunderside of the doors are open. Paint damage cleaning, polishing and waxing. Because alumi- can be caused by small accumulation of tar, num is subject to corrosion, be sure to giveindustrial precipitation, tree resin, insects and aluminum alloy wheels special attention in win- bird droppings, when not removed immediately. E030D01A-AAT When to Wax Again ter. If you drive on salted roads, clean theIf water alone is not strong enough to remove the wheels thoroughly afterwards. accumulated dirt, use a mild car washing solu- You should polish and wax the car again when tion. Be sure to rinse the surface after washing water no longer beads on a clean surface but After washing, be sure to rinse thoroughly. Ifto remove the solution. Never allow the solution spreads out over a larger area. soapy water dries on the finish, streaking willto dry on the painted surfaces. result. When the weather is warm and the humidity low, E030B01A-AAT you may find it necessary to rinse each section Spot Cleaning immediately after washing to avoid streaking. Don't use gasoline, strong solvents or corro- After rinsing, dry the car using a damp chamois sive cleaning agents. These can damage the or soft, absorbent cloth. The reason for drying finish of the car. To remove road tar, use the car is to remove water from the car so it willturpentine on a clean, soft cloth. Be gentle. dry without water spots. Don't rub, this can To remove dead insects or tree sap, use warm damage the finish. water and mild soap or car-washing solution. Soak the spot and rub gently. If the paint has lost its luster, use a commercial car-cleaning polish. smhma-4.p65 4 7/28/04, 5:14 PM

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders