owners manual Toyota 4Runner

all ratings: 0 average rating: 5

Checking the engine coolant Checking brake fluid level Look at the see-through coolant res-Coolant type selection ervoir when the engine is cold. The coolant level is satisfactory if it is be- Your coolant must contain ethylene-gly- col antifreeze. In addition to preventing tween the “F” and “L” lines on the res-freezing and subsequent damage to the ervoir. If the level is low, add ethylene-engine, this will also prevent corrosion. glycol type coolant. Further supplemental inhibitors or addi- The coolant level in the reservoir will varytives are neither needed nor recom- with engine temperature. However, if themended. level is on or below the “L” line, add cool-Read the antifreeze container for informa- ant. Bring the level up to the “F” line.tion on freeze protection. Follow the manufacturer’s directions for how much Use only ethylene-glycol type coolant. See information in the next column.to mix with water. The total capacity of the cooling system is given in Part 8. We rec- If the coolant level drops within a short ommend 50% solution be used for your time after replenishing, there may be a To check the fluid level, simply look at leak in the system. Visually check the ra-Toyota, or a sufficient quantity to provide the see through reservoir. The level diator, hoses, radiator cap and drain cockprotection to about -35C (-31C).should be between the “MAX” and and water pump. NOTICE “MIN” lines on the reservoir. If you can find no leak, have your Toyota It is normal for the brake fluid level to go Do not use alcohol type antifreeze dealer test the cap pressure and check foror plain water alone.down slightly as the brake pads wear. So leaks in the cooling system. be sure to keep the reservoir filled. ! If the reservoir needs frequent refilling, it CAUTION may indicate a serious mechanical prob- To prevent burning yourself, do not lem. remove the radiator cap when the en- If the level is low, add SAE J1703 or gine is hot. FMVSS No. 116 DOT 3 brake fluid to the brake reservoir. 201

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders