Mitsubishi Outlander PHEV III 3 owners manual page 197

text version of content this owner's manual page from owners manual to the vehicle Mitsubishi Outlander PHEV, year of production 2012:

B０0203201E３.book 34 ページ㸰㸮㸯㸱年㸯㸯月㸯９日　火曜日　午前㸯㸯時５㸮分 Active stability control (ASC) CAUTION - ASC OFF indicator NOTE zFor safety reasons, the “ASC OFF” switch This indicator will turn on when the zThe indicator may turn on when you start should be operated when your vehicle is ASC is turned off with the “ASC the Plug-in Hybrid EV System. This means stopped. OFF” switch. that the battery voltage momentarily dropped zBe sure to keep the ASC on while driving in CAUTION when the Plug-in Hybrid EV System was normal circumstances. started. It does not indicate a malfunction, zWhen indicator blinks, ASC is operating, provided that the indicator goes out immedi- which means that the road is slippery or that ately. NOTE your vehicle’s wheels are beginning to slip. zWhen moving out of mud, sand or fresh If this happens, drive slower with less accel- 7 snow, pressing the accelerator pedal may not erator input. ASC warning lamp/display allow the Plug-in Hybrid EV System output zIf the temperature in the braking system con- E00619401655 to increase. In such situations, temporarilytinues to increase due to continuous brakeIf an abnormal condition occurs in the sys- turning off the ASC with the “ASC OFF” control on a slippery road surface, the tem, the following warning lamp/warning switch. indicator will blink. To prevent the brake Refer to “If your vehicle becomes stuck in system from overheating, the brake control display will turn on. sand, mud or snow” page 9-22. of the traction control function will be tem-Warning lamp zUsing the “ASC OFF” switch turns off both porarily suspended. the stability control function and the traction The Plug-in Hybrid EV System control of control function. the traction control function and normal - ASC operation indicator zIf you continue to press the “ASC OFF” brake operation will not be affected. Park switch after the ASC is turned off, the “mis- your vehicle in a safe place. When the tem- - ASC OFF indicator taken operation protetion cfunction” will perature in the braking system has come activate and the ASC will turn back on. down, the indicator will be turned off andWarning display the traction control function will start operat- ASC operation indicator or ing again. ASC OFF indicator E00619301638 - ASC operation indicator The indicator will blink when the ASC is operating. 7-34 Starting and driving

owners manual Mitsubishi Outlander PHEV

owners manual Mitsubishi Outlander PHEV - year of production: 2012 - Mitsubishi Outlander PHEV III 3 owners manual EN