owners manual Skoda Octavia

all ratings: 0 average rating: 5

20A5Facelift.book Page 195 Saturday, September 6, 2008 2:13 PM Intelligent Technology 195 Traction control system (TCS) The TCS should normally always be switched on. It may be good practice in certain The traction control system prevents the driven wheels from spinning exceptional cases, such as when you wish to have wheel slip, to switch off the system. when accelerating. Examples: • when driving with snow chains • when driving in deep snow or on a loose surface • when it is necessary to rock a car free when it has become stuck. then you should switch on the TCS again. WARNING You should always adjust your style of driving to the conditions of the road Fig. 198 TCS switchsurface and the traffic situation. The increased safety offered must not tempt you to take greater risks than otherwise - risk of an accident! General The TCS makes it much easier, and sometimes at all possible, to start off, accelerate Note and climb a steep hill when the conditions of the road surface are unfavourable.• All four wheels must be fitted with the same tyres in order to achieve problem- free operation of the TCS. Differing rolling circumferences of the tyres can lead to Operating principle an undesirable reduction in the engine output. The TCS switches on automatically when the engine is started and then conducts a • Changes to vehicle (e.g. on engine, on the brakes, on chassis or other assign- self-test. The system monitors the speeds of the driven wheels with the aid of the ment of tyres and wheels) can influence the function of the TCS ⇒ page 243, ABS sensors. If the wheels are spinning, the force transmitted to the road surface is “Accessories, changes and replacement of parts”. automatically adapted by reducing the engine speed. This occurs at all speeds. The TCS operates in combination with the ABS ⇒ page197, “Antilock brake system Driver-steering recommendation* (ABS)”. The TCS will not function if a fault exists in the ABS system. The TCS warning light lights up in the instrument cluster when there is a fault on the The driver-steering recommendation is an additional function of the electronic TCS  ⇒page37. stability programme (ESP). This function indicates to the driver in critical situations Switching off by means of slight steering wheel impulses the direction evaluated by the system, in which the vehicle must be steered, so that it stabilizes. The driver-steering You can switch the TCS off and on again as you wish by pressing the button recommendation is active when braking shar ply on different road surfaces and on ⇒fig.198. The TCS warning light lights up in the instrument cluster when the TCS is the right and left vehicle side. switched off  ⇒page37. Using the systemSafety Driving Tips General MaintenanceBreakdown assistanceTechnical Data

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders