Subaru Tribeca owners manual page 195

text version of content this owner's manual page from owners manual to the vehicle Subaru Tribeca, year of production 2005 - 2014:

5-8 Audio TM !XM satellite radio !Displaying satellite radio ID of tuner !Category selection XMTMis a continental U.S. based satelliteWhen you activate satellite radio, you Press “ ” or “ ” of the “SEEK FLDR” radio service, including music, news, should have your satellite radio tuner IDbutton (7) to display the current category. sports, talk and children’s programming.ready because each tuner is identified byPress “ ” again to select the next XMTM provides digital quality audio and its unique satellite radio tuner ID. category, and press “ ” again to select text information, including song title andThe satellite radio ID will be needed whenthe previous category. artist name. A service fee is required toyou activate satellite radio and receive!Channel scan TM receive the XM service. For more satellite radio customer support. information, contact your SUBARU dealer The satellite radio ID can be found on thePressthe“SCAN”button(8)tochangethe or XMTM at radio to the SCAN mode. In this mode, the audio display by tuning the channel to “0”.radio scans through the channels until a www.xmradio.com or call 1-800- XMRADIO (1-800-967-2346) for U.S. Turn the “TUNE TRACK” button (4) to station is found. The radio will stop at the www.xmradio.ca or call 1-877-GET-XMSR select the satellite radio channel. station for 5 seconds while displaying the (1-877-438-9677) for Canada. !Bandselection button channel number, after which scanning will Push the “SAT” button (1) when the radiocontinue until the entire channel has been !Satellite radio reception scanned from the low end to the high end. Satellite radio signals are best received inis off to turn on the radio. Push the “SAT” button when the radio is Also during the category selection, chan- areas with a clear view of the open sky. Inon to select SAT1, SAT2 or SAT3 recep-nel scan can be performed in that cate- areas where there are tall buildings, trees,tion. gory. tunnels or other structures that may Press the “SCAN” button again to cancel obstruct the signal of the satellites, there!Channel selection the SCAN mode and to stop on any maybesignal interruptions. Other circum-Press “ ” of the “TUNE TRACK” button displayed channel. stances that may result in signal loss (4) to select the next channel and press include driving near a wall, steep cliff or“” of the button to select the previous!Selecting preset channels hill, or driving on the lower level of a multi-channel. Presetting a channel with a preset button tiered road or inside a parking garage. Keep pressing “ ” of the button to (10) allows you to select that channel in a To help reduce this condition, satellitechange to the next channel continuously single operation. Up to six, SAT1, SAT2 radio providers have installed ground- and keep pressing “ ” of the button to and SAT3 channels each may be preset. based repeaters in heavily populated change to the previous channel continu- !Howtopreset channels areas. However, you may still experienceously. 1. Press the “SAT” button (1) to select reception problems in some areas. SAT1, SAT2 and SAT3 reception.

owners manual Subaru Tribeca

owners manual Subaru Tribeca - year of production: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014 - Subaru Tribeca owners manual EN