owners manual Seat Ateca

all ratings: 0 average rating: 5

Driver assistance systems ●The slope of the descent is at least 10% Once connected, the Auto Hold function as- WARNING a when driving forward and 9% when driving in sists the driver in keeping the vehicle station-at Always be ready to brake. Otherwise, an acci- d reverse. ary at repeated intervals or for a certain peri- al dent could occur and cause injury. od of time with the engine running, for exam- ●The brake and the accelerator are not ● Hill Descent Control is only an auxiliary hnic ple, when going up a slope, when stopped at pressed. ec sys tem that in some situations may not suffi- T traffic lights or in heavy traffic with intermit- ciently brake the vehicle when going down a Hill Descent Control is deactivated on press- tent stops. slope. ing the brake and the accelerator or if the When connected, the Auto Hold function au- ● The speed of the vehicle may increase de- slope is below 5%. The function may be dis- e tomatically prevents the vehicle from rolling spite the intervention of Hill Descent Control. ic connected manually in the Easy Connect sys- when stationary without pressing the brake tem by pressing the  button and the HDC Adv pedal. function button ››› Fig. 41.  After detecting that the vehicle is stationary Auto Hold Function and the brake pedal has been released, the Control lamps Auto Hold function holds the vehicle. The Description and operation ››› in Warning and control lamps on driver can lift their foot off the brake pedal. ation page 107. When the driver touches the accelerator ped- Oper al or accelerates slightly to continue driving, It lights up white  the Auto Hold function releases the brake. The vehicle moves according to the slope of Hill Descent Control is active. s the road. ie It lights up grey enc  If the vehicle is stationary and one of the con- g ditions required by the Auto Hold function is Hill Descent Control is not active. The system is switched impaired, it disconnects itself and the but- Emer on, but is not adjusting. ton's control light goes out ››› Fig. 170. The electronic parking brake connects automati- Some warning and control lamps will light up cally, if necessary, to park the vehicle safe- Fig. 170 In the lower part of the centre con- briefly when the ignition is switched on to sole: Auto Hold function button.ly ››› . check certain functions. They will switch off ety after a few seconds. Saf › The control light of the  › › Fig. 170 buttonConditions for keeping the vehicle stationary remains on when the Auto Hold function iswith the Auto Hold function WARNING connected. ●The driver door must be closed. Observe the safety warnings ››› in Warning and control lamps on page 107. ●The driver's seat belt must be fastened.» 191

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders