BMW M5 F10 M Power owners manual page 193

text version of content this owner's manual page from owners manual to the vehicle BMW M5 F10, year of production 2011:

Seite 193 Replacing components Mobility the service center if you are unfamiliar with Do not remove the covers them or they are not described here. Do not remove the covers, and never You can obtain a selection of replacement stare into the unfiltered light for several hours; bulbs at the service center. otherwise, irritation of the retina could result.◀ Danger of burns Headlamp glass Only change bulbs when they are cool; Condensation can form on the inside of the ex‐ otherwise, there is the danger of getting ternal lamps in cool or humid weather. When burned.◀ driving with the light switched on, the conden‐ Working on the lighting system sation evaporates after a short time. The head‐ lamp glasses do not need to be changed. When working on the lighting system, you should always switch off the lights af‐If the headlamps do not dim despite driving fected to prevent short circuits. with the light switched on, increasing humidity forms, e. g. water droplets in the light, have the To avoid possible injury or equipment damage service center check this. when replacing bulbs, observe any instructions provided by the bulb manufacturer.◀ Headlamp setting Do not perform work/bulb replacement The headlamp adjustments can be affected by on xenon headlamps changing lamps and bulbs. Therefore after a Have any work on the xenon lighting system,change, have the headlamp setting checked including bulb replacement, performed only byand corrected by Service. a service center. Due to the high voltage present in the system, there is the danger of Front lamps, bulb replacement fatal injuries if work is carried out improperly.◀ Xenon headlamps Do not touch the bulbs Do not touch the glass of new bulbs withAt a glance your bare hands, as even minute amounts of contamination will burn into the bulb's surface and reduce its service life. Use a clean tissue, cloth or something similar, or hold the bulb by its base.◀ Light-emitting diodes (LEDs) Light-emitting diodes installed behind a cover serve as the light source for controls, display elements and other equipment. 1 Corner-illuminating lamps These light-emitting diodes, which are related2 Parking lamp, daytime running lights to conventional lasers, are officially designated 3 Low beams/high beams as Class 1 light-emitting diodes. 4 Turn signal 193 Online Edition for Part no. 01 40 2 909 953 - VI/13

owners manual BMW M5 F10

owners manual BMW M5 F10 - year of production: 2011 - BMW M5 F10 M Power owners manual EN