Subaru Impreza IV 4 owners manual page 191

text version of content this owner's manual page from owners manual to the vehicle Subaru Impreza, year of production 2011 - 2016:

Black plate (200,1) 3-78 Instruments and controls NOTE 6. When the indicator light flashes slowly Some garage door openers may re- and then rapidly after several seconds, quire you to do the above press-hold- release both buttons. release sequence a third time to com- 7. Plug the motor of the entrance gate/ plete the programming. garage door opener to the outlet. 4. The garage door opener should now 8. Test your entrance gate/garage door recognize the HomeLink®WirelessControl opener by pressing the programmed System and your garage door opener HomeLink® button. should activate when the HomeLink® ! Operating the HomeLink® Wireless button is pressed. Control System !Programmingforentrancegatesand Once programmed, the HomeLink® Wire- garage door openers in Canada1)HomeLink® button 1less Control System can be used to 1. Unplug the motor of the entrance gate2)HomeLink® button 2remote-control the devices to which its or garage door opener from the outlet.3)HomeLink® button 3buttons are programmed. To activate a device, simply press the appropriate but- NOTE 2. Press and hold the two outerton.Theindicatorlightilluminates, indicat- If any of the HomeLink® buttons areHomeLink® buttons (button 1 and buttoning that the signal is being transmitted. already programmed for other devices,3) until the HomeLink® indicator light ! Programming other devices skip step 2 because it clears thebegins to flash (after approximately 20 memory of all three buttons.seconds). Then release both buttons.To program other devices such as door 3. Hold the end of the entrance gate’s/locks, home lighting and security systems, garage door opener’s hand-held transmit-contact HomeLink® at www.homelink.com ter between 1 and 3 inches (25 and 76or call 1-800-355-3515. mm)awayfromtheHomeLink®buttonyou!Reprogrammingasingle HomeLink® wish to program. button 4. Press and hold the desired HomeLink®1. Press and hold the HomeLink® button button. you wish to reprogram. DO NOT release 5. Press and release (“cycle”) the hand-the button until step 4 has been com- held transmitter button every 2 secondspleted. until step 6 is complete.2. When the HomeLink® indicator light 北米Model "A1120BE-B" EDITED: 2011/ 10/ 28

owners manual Subaru Impreza

owners manual Subaru Impreza - year of production: 2011, 2012, 2013, 2014, 2015, 2016 - Subaru Impreza IV 4 owners manual EN