owners manual Seat Altea

all ratings: 0 average rating: 5

Driving and the environment189 Connectors Tyre pressure Your vehicle is fitted with a 12-pin connector for the electrical connection Set tyre pressure to the maximum permissible pressure shown on the sticker between the trailer and the vehicle.on the inside of the fuel tank flap. Set the tyre pressure of the trailer tyres in If the trailer has a 7-pin plug you will need to use an adapter cable. This is accordance with the trailer manufacturer's recommendations. available from any SEAT dealer. Exterior mirrors Trailer weight / draw bar loading Check whether you can see enough of the road behind the trailer with the Never exceed the authorised towing limit. If you do not load the trailer up to standard mirrors. If this is not the case you should have additional mirrors the maximum permitted trailer weight, you can then climb correspondingly fitted. Both exterior mirrors should be mounted on hinged extension steeper gradients. brackets. Adjust the mirrors to give sufficient vision to the rear. The maximum trailer weights listed are only applicable for altitudes up to WARNING 1,000m above sea level. With increasing altitude the engine power and therefore the vehicle's climbing ability are impaired because of the reduced Never transport people in a trailer. This could result in fatal accidents. air density. The maximum trailer weight has to be reduced accordingly. The weight of the vehicle and trailer combination must be reduced by 10% for every further 1,000 m (or part thereof). The gross combination weight is the Note actual weight of the laden vehicle plus the actual weight of the laden trailer. • Towing a trailer places additional demands on the vehicle. We recom- Where possible, operate the trailer with the maximum permitted draw bar mend additional services between the normal inspection intervals if the weight on the ball joint of the towing bracket, but do not exceed the specified vehicle is used frequently for towing a trailer. limit. • Find out whether special regulations apply to towing a trailer in your The figures for trailer weights and draw bar weights that are given on the country. data plate of the towing bracket are for certification purposes only. The correct figures for your specific model, which may be lower than these figures for the towing bracket, are given in the registration documentsŸSection Ball coupling of towing bracket* “Technical data”. Distributing the load Depending on the model version, the spherical head on the trailer hook may Distribute loads in the trailer so that heavy objects are as near to the axle as be stored in the tool box. possible. Loads carried in the trailer must be secured to prevent them The ball coupling is provided with instructions on fitting and removing the moving. ball coupling of the towing bracket. Safety First Operating instructionsTips and MaintenanceTechnical Data

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders