owners manual Subaru Outback

all ratings: 0 average rating: 5

Instruments and controls/Light control switch3-43 ker lights, rear side marker lights, tail lightsautomatically illuminate when unlockingwelcome lighting function. and license plate lights are automaticallythe doors (for Outback, including the rear. 30 seconds have passed since the on or off depending on the level of thegate) by using the remote keyless entrydoor is opened and closed.*1 ambient light. system. . The light control switch is turned to a “ ” position The low beam headlights will remain position other than “AUTO”. The headlights are all off. illuminated for 30 seconds*1 and then turn. The locking procedure is performed off. However, if any of the followingtwice. When performing the unlocking NOTE operations is done, the low beam head-procedure after performing the locking The sensitivity of the auto on/off head-lights will turn off.procedure, perform the locking procedure lights can be changed by your twice again. . The doors are locked. SUBARUdealer.ContactyourSUBARU. The light control switch is turned to a*1: The setting for the period of time in which dealer for details. Also, the sensitivityposition other than “AUTO”. can be changed using the multi infor- the low beam headlights remain on by the . Theignitionswitchisturnedtothe“ON”welcome lighting function can be changed by a mation display. For details, refer toposition. “Auto Light Sensor” F3-41. SUBARUdealer. Contact your SUBARU dealer Whenexiting: for details. Also, you can change the setting by ! Welcome lighting function While the welcome lighting function isoperating the multi information display. For Thewelcomelightingfunction turns on theactivated, the low beam headlights willdetails, refer to “Vehicle Setting” F3-41. For low beam headlight for smooth approach-remainilluminated even when either of themodels with the genuine SUBARU navigation ing to or exiting from the vehicle at night orfollowing operation is done.system, you can change the setting by using in a dark place. the navigation system. For details, refer to the . Thepush-buttonignitionswitchis The function is activated while all of theturned to the “OFF” status (models withOwner’s Manual supplement for the navigation following conditions are met.“keyless access with push-button startsystem. . The light control switch is in the system”) “AUTO” position . The key is pulled out from the ignition . It is dark enough to turn on the auto on/switch (models without “keyless access off headlights with push-button start system”) Whenapproaching: The low beam headlights will turn off While the welcome lighting function isunder any of the following conditions. activated, the low beam headlights will. 3 minutes have passed since the low beam headlights were illuminated by the – CONTINUED –

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders