or
owners manual Jeep Grand Cherokee
owners manual Jeep Grand Cherokee - year of production: 1998, 1999, 2000, 2001, 2002, 2003, 2004 - Jeep Grand Cherokee WJ manual EN
Document:
pdf (6.38 MB) 344 pages
all ratings: 0
average rating: 5
text version of content this owner's manual page
from owners manual to the vehicle Jeep Grand Cherokee, year of production 1998 - 2004:
190 STARTINGANDOPERATING
induce a torque interrupt and allow full engagement of4 FULL TIME to 4 LO or 4 LO to 4 FULL TIME
the newlyselectedposition. With the vehicle stationary, itWith the vehicle rolling at 2 to 3 mph (3 to 5 km/h), shift
may be necessary to shift from D (Drive) to R (Reverse)the transmission into N (Neutral). While the vehicle is
and back to D (Drive) after shifting. This will allow fullcoasting at 2 to 3 mph (3 to 5 km/h), shift the transfer
engagement of the newly selected position. Apply acase lever firmly to the desired position. Do not pause in
constant force when shifting the transfer case lever.transfer case N (Neutral).
4 PART TIME to 4 FULL TIME or 4 FULL TIME toNOTE: Pausing in transfer case N (Neutral) in vehicles
4 PART TIME equipped with an automatic transmission may require
Shifting between 4 PART TIME and 4 FULL TIME can beshutting the engine OFF to avoid gear clash while
madewiththevehiclestoppedorinmotion.Ifthevehiclecompleting the shift. If difficulty occurs, shift the trans-
is in motion, shifts can be made up to 55 mph (88 km/h).mission to N (Neutral), hold foot on brake, and turn the
Withthevehicleinmotion,twomomentaryreleasesoftheengine OFF. Make shift to desired mode.
accelerator pedal may be required after shifting. This willNOTE: Shifting into or out of 4LO is possible with the
induce a torque interrupt and allow full engagement ofvehicle completely stopped, however difficulty may oc-
the newly selected position. With the vehicle stationary, itcur due to the mating clutch teeth not being properly
may be necessary to shift from D (Drive) to R (Reverse)aligned. Several attempts may be required for clutch
and back to D (Drive) after shifting. This will allow fullteeth alignment and shift completion to occur. The pre-
engagement of the newly selected position. Apply aferred method is with the vehicle rolling 2 to 3 mph (3 to
constant force when shifting the transfer case lever.
Download PDF
Click here to download a pdf file with an instruction manual for Jeep Grand Cherokee
year of production from: 1998
Do you prefer pdf format?
Find out how to download
Enter the code to download PDF file:
All pages in one PDF file!
How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.
:
Jeep Grand Cherokee WJ manual
pages 187 - 193
Jeep Grand Cherokee WJ manual
page 190 / 344
this site is maintained by advertising - for view instructions, turn off ad blocking in your browser
Download PDF