owners manual Seat Alhambra

all ratings: 0 average rating: 5

Towing bracket device Loading the trailer s ● With the engine running, the electrical WARNING equipment on the trailer will be supplied with The combined vehicle and trailer must be If the load moves, the stability and safety ofation power. balanced. Use the maximum drawbar load ific the vehicle and trailer combination will be se- authorised and do not overload the front or riously affected and this could result in a seri-pec s the rear of the trailer: ous accident. al Loading the trailer ● Always correctly load the trailer. hnic ●Distribute loads in the trailer so that heavy ec ● T Always secure loads correctly with suitable objects are as near to the axle as possible or Trailer weight / drawbar load and undamaged attachment rope or straps. above it. The trailer weight is the load that the vehicle ●Correctly secure the trailer load. can pull ››› . The drawbar load is the vertical weight of the tow hitch on the tow hitch ball e Driving with a trailer ic Tyre pressure ››› page 188. Adv Inflate the trailer tyres according to the man- Adjusting the headlights The figures for trailer weights and drawbar ufacturer's instructions. load weights given on the data plate of the When towing a trailer, the front of the vehicle tow hitch are for values of this model only.Inflate the towing vehicles tyres to the maxi- may rise and so the dipped beam headlights The correct figures for your specific vehicle,mum ››› page 231. may blind other drivers. Use the headlight which may be lower than these figures for the range control to lower the cone of light. If you tow hitch, are given in the vehicle documen-WARNING do not have headlight range control, have tation. The instructions in the official vehicle the headlights adjusted by a specialised Exceeding the maximum authorised axle ation documents take precedence. workshop. Vehicles with high-intensity dis- load, drawbar load or the gross combination weight of the towing vehicle and trailer couldcharge lamps adapt automatically and do notOper For the sake of road safety, SEAT recom- cause a serious accident with severe conse-require adjustment. mends using the maximum allowed drawbar quences. load. The handling of the combined vehicle ● Never exceed the specifications.Details of driving with a trailer and trailer will be poor if the drawbar load is too low. ● With the actual load on the front and rear● If the trailer has an overrun brake, apply axles, the maximum axle load should never the brakes gently at first and then, firmly. The drawbar load increases the weight on the be exceeded. The weight on the front and rear This will prevent the jerking that can beety rear axle, reducing the vehicle carrying ca- should never exceed the gross vehicle caused by the trailer wheels locking. Saf pacity. weight. ●As of the combined vehicle and trailer Gross combination weight mass, braking distances will be greater. ●Select a low gear before driving down a This figure refers to the combined weight of steep hill to use the engine braking effect to » the loaded vehicle and loaded trailer. 185

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders