owners manual Lexus CT200h

all ratings: 0 average rating: 5

CT200h_OM_OM76135E_(EE).book Page 185 Friday, May 30, 2014 11:14 AM 4-2. Driving procedures185 ■For the shift positions ●When the power switch is off, the shift position cannot be changed. ●When the power switch is in ON mode (htyhe brid system is not operating), the shift position can only be changed to N. Thet p shifosition will be changed to N even if the shift lever is shifted to D or R and held in that position. ●When the “READY” indicator is on, the shift position can be changed from P to D, N or R. ●When the “READY” indicator is flashing, the shift position cannot be changed from P to another position even if the shift le opever risated. Wait until the “READY” indicator changes from a flashing to a solid light, and then operate the shift lever again. ●The shift position can only be changed to B directly from D. In addition, if an attempt is made to change the shift position by moving the shift lever or by pressing the P position switch in any of the following situations, the buzzer will sound and the shifting operation will be disabled or the shift position will automatically change to N. When this happens, select an appropriate shift position. ●Situations where the shifting operation will be disabled: • When an attempt is made to change the shift position from P to another position by4 moving the shift lever without depressing the brake pedal. • When an attempt is made to change the shift position from P or N to B by moving the shift lever. ●Situations where the shift position will automatically change to N:Dr ivi *1 n • When the P position switch is pressed while the vehicle is running. • When an attempt is made to select the R position by moving the shift lever when theg vehicle is moving forward.*2 • When an attempt is made to select the D position by moving the shift lever when the 3 vehicle is moving in reverse.* • When an attempt is made to change the shift position from R to B by moving the shift lever. 1 *: Shift position may be changed to P when driving at extremely low speeds. 2 * : Shift position may be changed to R when driving at low speeds. 3 * : Shift position may be changed to D when driving at low speeds. ■Reverse warning buzzer When shifting into R, a buzzer will sound to inform the driver that the shift position is in R. ■About engine braking When shift position B is selected, releasing the accelerator pedal will apply engine brak- ing. • When the vehicle is driven at high speeds, compared to ordinary gasoline-fueled vehi- cles, the engine braking deceleration is felt less than that of other vehicles. • The vehicle can be accelerated even when shift position B is selected. If the vehicle is driven continuously in the B position, fuel efficiency will become low. Usu- ally, select the D position. CT200h_OM_OM76135E_(EE)

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders