owners manual Seat Exeo

all ratings: 0 average rating: 5

exeo_EN.book Seite 181 Montag, 30. August 2010 4:45 16 Driving181 Selector lever lock The selector lever lock only works if the vehicle is stationary or driving at speeds up to 5 km/h. At higher speeds the selector lever lock in the N posi- The selector lever lock prevents gears from being engaged tion is disengaged automatically. inadvertently, so that the vehicle is not set in motion uninten-The selector lever lock is not engaged if the selector lever is moved quickly tionally. through position N (e.g. when shifting from R to D). This makes it possible, for instance, to “rock” the vehicle backwards and forwards if it is stuck in snow or mud. The selector lever lock engages automatically if the brake pedal is not depressed and the lever is in position N for more than about a second. Interlock button The interlock button on the selector lever handle prevents the driver from inadvertently engaging particular gears. Press the button in to disengage the selector lever lock. The selector lever positions in which the interlock button has to be pressed are shown in the illustration, highlighted in colour ⇒fig.145. Safety interlock for ignition key Once the ignition has been turned off, the key may be removed only if the gear Fig. 145 Selector lever selector is in position P. While the key is not in the ignition, the selector lever lock functionsis locked in position P. The selector lever lock is released as follows: – Switch the ignition on. Kick-down feature –Press the brake pedal and at the same time press in the interlock The kickdown feature is designed to give maximum accelera- button. tion. Vehicles with multitronic® gearbox Automatic selector lever lock With the ignition turned on, the selector lever is locked in the positions P and When the accelerator pedal is pressed right down past the point of resistance N. To remove it from these positions, press on the brake. The following at full throttle, the gearbox will select a lower gear ratio, depending on road message appears in the instrument panel as a reminder for the driver when speed and engine speed. While you keep the accelerator depressed the the selector lever is in position P or N:engine speed is automatically controlled to give your vehicle maximum accel- eration. WHEN STATIONARY APPLY FOOTBRAKE WHILE SELECTING GEAR Safety First Operating Instructions Practical Tips Technical Specifications

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders