owners manual Seat Leon

all ratings: 0 average rating: 5

180 Driving flash slowly depending on whether or not the vehicle has a driver WARNING (Continued) 1) information system* . ● Make sure that the ESC remains switched on. Please note that when the ASR and ESC are deactivated, the wheels may start to spin, causing – When the engine is running, switch off the traction control the vehicle to lose grip. Risk of accident! 1) 2) (ASR) . ● After putting the vehicle into gear, the “sport” mode of the ESC should be deactivated again by briefly pressing the OFF button. – Move the selector lever to position “S” or tiptronic, or select the driving mode Sport from the SEAT Drive Mode* ⇒ page 211. Note – Press the brake pedal firmly with your left foot and hold it down ● After using the “Launch control programme”, the gearbox temperature for at least one second. may have increased considerably. In this case, the programme could be dis- abled for several minutes. The programme can be used again after the cool- – With your right foot, press the accelerator down to the full throt- ing phase. tle or kick-down position. The engine speed will stabilise at ap- ● Accelerating with the “Launch control programme” places a heavy load prox. 3200 rpm (petrol engine) or approx. 2000 rpm (diesel en-  on all parts of the vehicle. This can result in increased wear and tear. gine). – Take your left foot off the brake pedal. Inertia mode WARNING The inertia mode enables the kinetic energy of the vehicle to be ● Always adapt your driving style to the traffic conditions. harnessed enabling certain stretches to be driven without using ● Only use the “Launch control programme” when road and traffic con- the accelerator. This enables fuel to be saved. Use the inertia mode ditions permit, and make sure the way in which you drive and accelerate to “let the vehicle roll” before, for example, arriving in a town. the vehicle does not inconvenience or endanger other road users. Switching on inertia mode Important: selector lever must be in position D, gradients below  12 %. 1) On vehicles with the driver information system, the ESC lamp lights up permanently and the corresponding text message Stability control deactivated (temporary) appears on the in- strument panel to indicate the deactivation status. 2) Vehicles without driver information system: the warning lamp flashes slowly/Vehicles with driver information system: the warning lamp stays on.

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders