owners manual Chrysler Crossfire

owners manual Chrysler Crossfire - year of production: 2003, 2004, 2005, 2006, 2007 - Chrysler Crossfire owners manual EN

Document: pdf (1.68 MB) 296 pages

all ratings: 0 average rating: 5

text version of content this owner's manual page from owners manual to the vehicle Chrysler Crossfire, year of production 2003 - 2007:

182 WHATTODOINEMERGENCIES 11. Turn the ignition key to the ON/RUN position.18. Checkthepressureinthetire.Ifthepressureisabove 12. Press the switch on the air pump to 1. The air pump19 psi (130 kPa), inflate the tire to the pressure indicated should start to inflate the tire.on the tire pressure label on the driver side latch pillar. 13. After five minutes, the tire should be inflated to at19. Have the tire inspected at the earliest opportunity at least 26 psi (180 kPa) on the pressure gauge.an authorized dealer or tire service center. 14. If the tire doesn’t inflate to this level, press the airNOTE: Donotexceed 50 mph (80 km/h) until the tire pump switch to 0, disconnect the TIREFIT system fromhas been inspected. the tire, and drive the vehicle back and forth approxi-NOTE: If a pressure of at least 19 psi (130 kPa) cannot mately 30 feet (9 m) to distribute the sealant more evenlybe maintained in the tire, the tire is too badly damaged. within the tire. Do not attempt to drive the vehicle further, and call for 15. Attachtheairpumphosedirectlytothetire,presstheassistance. switch to 1, and inflate the tire again. NOTE: If a tireNOTE: Do not operate the electric air pump for more pressure of 26 psi (180 kPa) is not reached after fivethan eight minutes to avoid overheating. The air pump minutes, the tire is too badly damaged. Do not attempt tomay be used again once it has cooled down. drive the vehicle further, and call for assistance.NOTE: Replace the TIREFIT sealant bottle once every 16. If a tire pressure of 26 psi (180 kPa) is obtained, pressfour years to assure optimum operation of the system. the air pump switch to 0, turn the ignition switch to theNOTE: If TIREFIT is liquid, clean water and a damp OFF/LOCKposition, and disconnect the TIREFIT system.cloth will removethematerialfromthevehicleortireand 17. Drive the vehicle for about 10 minutes to ensurewheel components. Once TIREFIT sealing material has optimum distribution of the tire sealant within the tire.dried, it can easily be peeled off and properly discarded.

Download PDF

Click here to download a pdf file with an instruction manual for Chrysler Crossfire
year of production from: 2003

Do you prefer pdf format?
Find out how to download

Enter the code to download PDF file:

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.