BMW M5 F10 M Power owners manual page 182

text version of content this owner's manual page from owners manual to the vehicle BMW M5 F10, year of production 2011:

Seite 182 Mobility Wheels and tires 6. With the compressor switched off, insertIf a tire pressure of 2 bar is not reached: the plug into the power socket inside the 1. Switch off the compressor. vehicle. 2. Unscrew the filling hose from the wheel. 3. Drive forward and back to distribute the sealant in the tire. 4. Inflate the tire again using the compressor. If an inflation pressure of 2 bar cannot be reached, contact your service center. Stowing the Mobility System 1. Unscrew the filling hose of the sealant bot‐ tle from the wheel. 7. With the ignition turned on or the engine running, switch on the compressor. 2. Unscrew the compressor connection hose from the sealant bottle. 3. Connect the sealant bottle filling hose that was previously connected to the valve to the vacant connector on the sealant bottle. This prevents left-over sealant from escap‐ ing from the bottle. 4. Wrap the empty sealant bottle in suitable material to avoid dirtying the cargo area. 5. Stow the Mobility System back in the vehi‐ Let the compressor run for approx. 3 to 8 mi‐ cle. nutes to fill the tire with sealant and achieve a tire inflation pressure of approx. 2.5 bar. Distributing the sealant While the tire is being filled with sealant, the in‐ Immediately drive approx. to ensure that the flation pressure may sporadically reach approx. sealant is evenly distributed in the tire. 5 bar. Do not switch off the compressor in this Do not exceed a speed of . phase. Do not drop below if possible. Enclosed areas Do not let the engine run in enclosed Correcting the tire inflation pressure areas; otherwise, breathing of exhaust fumes 1. Stop at a suitable location. may lead to loss of consciousness and death. 2. Screw the connection hose of the com‐ The exhaust gases contain carbon monoxide, pressor directly onto the tire valve. an odorless and colorless but highly toxic gas.◀ 3. Insert the connector into the power socket in the vehicle interior. Switch off the compressor after 10 mi‐ 4. Correct the tire inflation pressure to nutes 2.5 bar. Do not allow the compressor to run longer than ▷ Increase pressure: with the ignition 10 minutes; otherwise, the device will overheat turned on or the engine running, switch and may be damaged.◀ on the compressor. 182 Online Edition for Part no. 01 40 2 909 953 - VI/13

owners manual BMW M5 F10

owners manual BMW M5 F10 - year of production: 2011 - BMW M5 F10 M Power owners manual EN