owners manual Hyundai Getz

all ratings: 0 average rating: 5

4- 4 CORROSION PREVENTION AND APPEARANCE CARE trol chemicals are used, you should payTo clean cast aluminum alloy wheels, If you find any nicks or scratches in the particular attention to the underside ofuse a mild soap or neutral detergent. Dopaint, use touch-up paint to cover them the car. Start by rinsing the car tonot use abrasive cleaners. Protect theto prevent corrosion. To protect the remove dust and loose dirt. In winter, orbare-metal surfaces by cleaning, pol-paintwork of the car against corrosion, if you have driven through mud or muddyishing and waxing. Because aluminumyou must clean your Hyundai (at least water, be sure to thoroughly clean theis subject to corrosion, be sure to giveonce a month). Give special attention underside as well. Use a hard directaluminum alloy wheels special atten-to the removal of salt, mud and other substances on the underside of the stream of water to remove accumula-tion in winter. If you drive on salted tions of mud or corrosive materials.roads, clean the wheels thoroughly af-splashboards of the car. Make sure that Use a good quality car-washing solu- terwards.the outlets and the underside of the tion and follow the manufacturer's di- doors are open. Paint damage can be caused by small accumulation of tar, rections on the package. These areAfter washing, be sure to rinse thor- industrial precipitation, tree resin, in- available at your Hyundai dealer or autooughly. If soapy water dries on the parts outlet. Don't use strong house-finish, streaking will result.sects and bird droppings, when not hold detergents, gasoline, strong sol- removed immediately. If water alone is not strong enough to remove the accu- vents or abrasive cleaning powders asWhen the weather is warm and the mulated dirt, use a mild car washing these may damage the finish.humidity low, you may find it neces- Use a clean sponge or cloth, rinse itsary to rinse each section immediatelysolution. Be sure to rinse the surface frequently and don't damage the finishafter washing to avoid streaking.after washing to remove the solution. by rubbing too hard. For stubborn spots, Never allow the solution to dry on the dampen them frequently and remove After rinsing, dry the car using a damppainted surfaces. them a little at a time.chamois or soft, absorbent cloth. The To clean whitewall tires, use a stiffreason for drying the car is to remove brush or soapy steel-wool scouringwater from the car so it will dry without pad. water spots. Don't rub, this can dam- To clean plastic wheel covers, use aage the finish. clean sponge or soft cloth and water.

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders