owners manual Seat Mii

all ratings: 0 average rating: 5

Advice If the wheel bolt is very tight, you may beImportant information about wheel bolts ● Only use wheel bolts which correspond to able to loosen it by pushing down on the end the wheel rims in question. The wheel rims and bolts have been de- of the wheel brace carefully with your foot. signed to be fitted to factory options. If differ-● Never use different wheel bolts. Hold on to the vehicle for support and take ent rims are fitted, the correct wheel bolts ● The bolts and threads should be clean, free care not to slip. with the right length and correctly shaped of oil and grease and easy to thread. bolt heads must be used. This ensures that ● To loosen and tighten the wheel bolts, al- Loosening wheel bolts wheels are fitted securely and that the brake ways use the wheel brace supplied with the ●Fit the wheel brace as far as it will go oversystem functions correctly. vehicle. the wheel bolt ››› Fig. 127. In some circumstances, wheel bolts from the● Loosen the wheel bolts only about one turn ●Hold the wheel brace at the end and rotate same model vehicle should not be used.before raising the vehicle with the jack. the bolt approximately one turn anticlockwise ● Never grease or lubricate wheel bolts or the ››› . Wheel bolt tightening torquewheel hub threads. Although they have been tightened to the prescribed torque, they The prescribed tightening torque for wheel Loosening anti-theft wheel bolts could come loose while driving. bolts for steel and alloy wheels is 110 Nm. ● Never loosen the bolted joints of wheel For wheels with full hubcap, the anti-theft Have the tightening torque of the wheel bolts rims with bolted ring trims. wheel lock must be threaded into position checked as soon as possible with a reliable ››› Fig. 128 2 before mounting the hubcap. ● If the wheel bolts are not tightened to the torque wrench. Otherwise it will not be possible to mount the correct torque, they may come loose while If wheel bolts are rusty and it is difficult to entire hubcap. driving, and the bolts and rims may come tighten them, the threads should be replaced out. If the tightening torque is too high, the ● and cleaned before checking the tightening Take the adapter for anti-theft wheel bolts wheel bolts and threads can be damaged. torque. out of the vehicle tool kit. ●Insert the adapter onto the wheel bolt Never grease or lubricate wheel bolts or the ››› Fig. 128. Push it on as far as it will go.wheel hub threads. Although they have been tightened to the prescribed torque, they ●Fit brace onto the adapter as far the wheel could come loose while driving. as possible. ●Hold the wheel brace at the end and rotate WARNING the bolt approximately one turn anticlockwise If the wheel bolts are not fitted correctly they ››› . could be released while driving leading to loss of vehicle control and serious damage. 176

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders