owners manual Seat Leon

all ratings: 0 average rating: 5

176 Driving – Wait for the gearbox to engage the gear (a slight movement can Note be felt). ● If the selector lever lock does not engage, there is a fault. The transmis- sion is interrupted to prevent the vehicle from accidentally moving. Follow – Release the brake and press the accelerator ⇒  . the procedure below in order for the selector lever lock to engage again: – With a 6-speed gearbox: press the brake pedal and release it again.Stopping briefly – With a 7-speed gearbox: press the brake pedal. Move the selector lev- – Apply the foot brake to hold the vehicle when stationary (for in- er to position P or N and subsequently engage a gear. stance at traffic lights). Do not press the accelerator. ● Despite a gear being engaged, the vehicle does not move forwards or back. Proceed to the next mode: Stopping/Parking – When the vehicle does not move in the required direction, the system If the driver door is opened and the selector lever is not in position may not have the gear range correctly engaged. Press the brake pedal P, the vehicle could move. Driver message:  Gear change: selector and engage the gear range again. lever in drive position! will be displayed. Additionally, a buzzer will – If the vehicle still does not move in the required direction, there is a sound. system malfunction. Seek specialist assistance and have the system  checked. – Press and hold the brake pedal ⇒  . – Apply the handbrake. Driving tips – Move the selector lever to position P. The gearbox changes gear ratios automatically as the vehi- Holding the car on a hill cle moves. – Always apply the brake pedal firmly to prevent the vehicle from “moving backwards; if necessary, apply the handbrake” ⇒  . The engine can only start with the selector lever in the position P or Do not try to stop the vehicle “rolling back” by increasing the N. At low temperatures, below -10 °C (50 °F), the engine can only engine speed when a gear is engaged (pressing the accelera- start with the selector lever in the position P. tor) ⇒  . Starting the vehicle Moving off uphill in vehicles without Hill start assistant* – Press and hold the brake pedal. – Apply the handbrake. – Press and hold the interlock button (the button in the selector – Once you have engaged a gear press the accelerator carefully lever handle), move the selector lever to the desired position,  and disengage the handbrake. for instance D ⇒ page 173, and release the interlock button.

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders