owners manual Seat Toledo

all ratings: 0 average rating: 5

Technical specifications Type plate ●all pieces of equipment and other weights, s ● Depending on the volume of equipment, ●roof loads including the roof rack, driving style, road conditions, weather condi- The type plate ››› Fig. 165 is located at the ation tions and the condition of the vehicle, con- bottom of the front driver side door pillar be- ific ●equipment that is not included in the run- sumption values can differ from the theoreti- tween the front and rear doors. ning order weight, pec cal values stated here. s al ●when using the towing bracket, the draw- The type plate indicates the following bar load (max. 50 kg) hnic weights: ec T 8 Total permitted weight of the vehicle Information on fuel Calculating fuel consumption and CO 2 when loaded emissions according to the ECE regulations consumption 9 Maximum authorised weight of the vehi- and the EU specifications cle with a trailer, when the vehicle oper- e Calculation of fuel consumption for urban ic Fuel consumption ates as a tractor driving begins when cold-starting the engine. Adv 10 Maximum permitted load of the front axle Then, normal city driving is simulated.The consumption and emission details 11 Maximum permitted load of the rear axle shown on the vehicle data sticker differ from In calculating extra-urban driving fuel con- one vehicle to another. sumption, braking and acceleration is done Weight in running order in all gears, as in daily use of the vehicle.Vehicle fuel consumption and CO emissions 2 The weight in running order only has one ap- appear on the vehicle data sticker in the Driving speed varies within a range of 0 and proximate value. This value corresponds to spare wheel well, inside the boot and on the 120 km/h (75 mph). the minimum operative weight of the vehicle rear cover of the Maintenance Programme. ation The consumption value in combined driving without additional equipment that increases is composed of 37% of the value of urbanThe fuel consumption and CO emission val- 2 Oper its weight, i.e. air conditioning, spare wheel, driving and 63% of the value of extra-urbanues refer to the weight category assigned to towing bracket. driving. your vehicle according to the engine and The running order weight also includes 75 kg gearbox combination, as well as the specific of the weight of the driver and service fluids,WARNING equipment fitted, and is only used to com- in addition to a fuel tank at 90% capacity. pare between the different models. The maximum permitted weight values must From the difference between the total permit-not be exceeded – Risk of an accident and The fuel consumption and CO emissions doety 2 damage to the vehicle! ted weight in running order the approximate not depend only on the performance of the Saf carrying capacity can be calculated ››› . vehicle, they can also differ from the estab- lished values depending on other factors Note The carrying capacity must include: such as driving style, road conditions, traffic ● If you wish to calculate the exact weight of conditions, environmental conditions, load ●occupants, your vehicle please contact a SEAT dealer. and number of passengers. » 175

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders