Mitsubishi Outlander PHEV III 3 owners manual page 176

text version of content this owner's manual page from owners manual to the vehicle Mitsubishi Outlander PHEV, year of production 2012:

B０0203201E３.book 13 ページ㸰㸮㸯㸱年㸯㸯月㸯９日　火曜日　午前㸯㸯時５㸮分 Starting and stopping the Plug-in Hybrid EV System 2.Apply the parking brake firmly while NOTE depressing the brake pedal. zIf the parking lock mechanism is faulty, a 3.After pressing the electrical parking warning is displayed on the information switch, press the power switch to stop screen in the multi-information display. Plug-in Hybrid EV System. (Refer to When this warning is displayed, Plug-in “Electrical Parking switch” on page 7-16,) Hybrid EV System cannot be stopped unless you apply the parking brake and then press WARNING the power switch. Park on a flat place with zNever stop Plug-in Hybrid EV System the parking brake securely applied. Have during running except in emergency. The your vehicle inspected by a MITSUBISHI effectiveness of the brake becomes very MOTORS Authorised Service Point. 7 poor and the steering wheel becomes very NOTE heavy, which can easily lead to an acci- zDo not insert into the key slot anything other dent. than the keyless operation key. This could cause damage or a malfunction. NOTE zRemove the object or additional key from the zDo not operate the power switch during run- If the keyless operation key is keyless operation key before inserting the ning except in emergency. If you have to stopnot operating properly key into the key slot. The vehicle may not be Plug-in Hybrid EV System in emergency able to receive the registered ID code from during running, continue to press the power E00632901022 the registered key. Therefore, the Plug-in switch for three seconds or longer or press Insert the keyless operation key into the key Hybrid EV System may not start and the the power switch three times or more slot. Starting the Plug-in Hybrid EV System operation mode may not change. quickly. Plug-in Hybrid EV System stops,and changing the operation mode should be the operation mode turns to ACC, and the now possible. Keyless operation key reminder selector lever position shifts to the “P” posi-Remove the keyless operation key from the tion at very slow speed. key slot after starting the Plug-in Hybrid EV E00633001046 zIf you press the power switch when the System or changing the operation mode. selector lever position is other than “P” posi- tion while your vehicle is stopped, the selec- tor lever position automatically shifts to “P” position, Plug-in Hybrid EV System stops, and the power mode turns to “OFF”. Starting and driving 7-13

owners manual Mitsubishi Outlander PHEV

owners manual Mitsubishi Outlander PHEV - year of production: 2012 - Mitsubishi Outlander PHEV III 3 owners manual EN