owners manual Volvo S60

all ratings: 0 average rating: 5

2007 Volvo S60 pg. 152 Wheels and tires Glossary of tire terminology Tire suppliers may have additional markings, notes or warnings such as standard load, radial tubeless, etc. ● Tire information placard: A placard showing the OE (Original Equipment) tire sizes, recommended inflation pressure, and the maximum weight the vehicle can carry. ● Tire Identification Number (TIN): A number on the sidewall of each tire providing information about the tire brand and manufacturing plant, tire size and date of manufacturer. ● Inflation pressure: A measure of the amount of air in a tire. ● Standard load: A class of P-metric or Metric tires designed to carry a maximum load at 35 psi [37 psi (2.5 bar) for Metric tires]. Increasing the inflation pressure beyond this pressure will not increase the tires load carrying capability. ● Extra load: A class of P-metric or Metric tires designed to carry a heavier maximum load at 41 psi [43 psi (2.9 bar) for Metric tires]. Increasing the inflation pressure beyond this pressure will not increase the tires load carrying capability. ● kPa: Kilopascal, a metric unit of air pressure. ● PSI: Pounds per square inch, a standard unit of air pressure. ● B-pillar: The structural member at the side of the vehicle behind the front door. ● Bead area of the tire: Area of the tire next to the rim. ● Sidewall of the tire: Area between the bead area and the tread. ● Tread area of the tire: Area of the perimeter of the tire that contacts the road when mounted on the vehicle. ● Rim: The metal support (wheel) for a tire or a tire and tube assembly upon which the tire beads are seated. ● Maximum load rating: a figure indicating the maximum load in pounds and kilograms that can be carried by the tire. This rating is established by the tire manufacturer. ● Maximum permissible inflation pressure: the greatest amount of air pressure that should ever be put in the tire. This limit is set by the tire manufacturer. ● Recommended tire inflation pressure: inflation pressure, established by Volvo, which is based on the type of tires that are mounted on a vehicle at the factory. This inflation pressure is affected by the number of occupants in the vehicle, the amount of cargo, and the speed at which the vehicle will be driven for a prolonged period. This information can be found on the tire inflation placard(s) located on the driver's side B-pillar or on the inside of the fuel filler door on Canadian models, and in the tire inflation table in this chapter. ● Cold tires: The tires are considered to be cold when they have the same temperature as the surrounding (ambient) air. This temperature is normally reached after the vehicle has been parked for at least 3 hours. pg. 153 Wheels and tires file:///K|/ownersdocs/2007/2007_S60/07s60_07.htm (13 of 22)12/30/2006 5:46:04 PM

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders