Mercedes Benz GLE Class owners manual page 175

text version of content this owner's manual page from owners manual to the vehicle Mercedes GLE, year of production 2015:

Charging the high-voltage battery 173 Display ; maximumpermittedchargecurrent, select the next lowest available value. Lights up There are no malfunctions.Onlysetthemaximumpermittedchargecurrent green The high-voltage battery canin the on-board computer menu if: be charged. Ritisnotpossibletosetthechargecurrentong Flashes redThe protective and indicatorthe charging cable system has detected a mal-Rtheprecise maximumpermitted charge cur- function due to an internalrent can only be set via the on-board com- malfunction.Thehigh-voltageputer parkin battery cannot be charged.Setting the maximum permitted charge currentd onthecharging cable is described below.an If the control detects residual current or a mal-XToadjustthesetting:pressbutton?g function, the charging process is halted. Oncerepeatedly until the desired setting is selec-n the malfunction has been rectified the chargingted in display =. i v process is resumed automatically. RTwoLEDsareflashing:minimumsettingi r For information on problems relating to theRAll LEDs are flashing: maximum settingD charging process, see (Y page 176).If, after the chargingprocess,thechargingcable Setting the maximum charge currentis: GWARNING Rleft connected to the power socket, the cur- If the charge current draw via a mains socketrentlyselectedvalueswillbeusedforthenext is too high during the charging process, thecharging process. external electrical system may overheat.Rremovedfromthepowersocket,thevalues There is a risk of fire. will be reset to the minimum setting for the nextchargingprocess.Youmaythenneedto Beforebeginningthechargingprocess,checkreset the values of the maximum charge cur- the maximumpermissible charge currentrent. locally. Consult a qualified expert to do soiIfthevehiclerequiresmoretimethanusual where necessary. whencharging, check the maximum charge If necessary, adjust your vehicle's settings.current settings using the controls on the charging cable or in the on-board computer's !Anexcessivechargecurrentcanblowafusemenu. or lead to overheating of the external powerIndicator lamp on the vehicle socket supply. Check whether the external powerWhentheindicator lamp on the vehicle socket supply is compatible with the set charge cur-lights up, this means the following: rent. If necessary, lower the set charge cur- rent or use another power socket.Indicator Beforestarting the charging process at a powerlamp socket,checkthemaximumpermissiblechargeFlashesThe connection between the current for the relevant power socket or theorangevehicle and the current building. source is being established Youcansetthemaximumpermissiblecharge before charging begins. current: Ronthechargingcablecontrols Flashes The high-voltage battery is RintheSettingsmenuoftheon-boardcom-green being charged. puter (Y page 273) Flashes redAmalfunction has occurred The lower value of the two charge current set-while charging. tings – on the charge cable controls and in theThe indicator lamp goes out on-board computer – determines the maximum after approximately charge current. If you cannot set the precise 90seconds. Z

owners manual Mercedes GLE

owners manual Mercedes GLE - year of production: 2015 - Mercedes Benz GLE Class owners manual EN