Mitsubishi Galant IX 9 owners manual page 171

text version of content this owner's manual page from owners manual to the vehicle Mitsubishi Galant, year of production 2003 - 2012:

BK0121200US.book 82 ページ㧞㧜㧝㧜年４月㧝４日　水曜日　午前㧝㧝時㧞４分 Features and controls ●When it rains, or when the vehicle has been washed, the inside of the lens sometimes becomes foggy. This is the NOTE ●For vehicles equipped with the Mitsubishi Multi-Commu- same as when window glass mists up on a humid day, and nication System, Mitsubishi Multi-Communication Sys- does not indicate a problem. When the light is switched tem can be used to deactivate the light auto-cutout on, the heat will dry out the fog. However, if water col- function. lects inside the light, have it checked by an authorized For details, refer to the separate owner’s manual. Mitsubishi Motors dealer or a repair facility of your choice. When you want to keep the lights on: Light auto-cutout function (headlights and other If the light switch is turned to the “ ” or “ ” position again after the engine is turned off, the 3 minute auto-cutout function lights) described above will not work. The lights (the parking lights, N00532600495 tail lights and license plate lights) will stay on and will not turn ●If the ignition key is turned to “LOCK” or “ACC” posi- off automatically. 3 tion or removed from the ignition switch and the driver’s NOTE door is opened with the light switch in the “ ” or “ ” ●For vehicles equipped with the Mitsubishi Multi-Commu- position, the lights automatically turn off. nication System, Mitsubishi Multi-Communication Sys- If the driver’s door is opened after the key is removed tem can be used to keep the light on for approximately 3 from the ignition switch, a high-pitched constant tone minutes after you leave the vehicle. will sound to remind you to turn off the lights. For details, refer to the separate owner’s manual. If the driver’s door is opened with the key in the ignition switch, a low-pitched tone will sound to remind you to If the light auto-cutout function is reprogrammed, the 3 min- remove the key. utes auto-cutout function can be activated using the following ●If the ignition key is turned to “LOCK” or “ACC” posi- steps. tion or removed from the ignition switch with the driver’s 1. After turning the ignition key to the “LOCK” or “ACC” door closed and the light switch in the “ ” or “ ” position, the lights will stay on for about 3 minutes and position or removing it from the ignition switch, set the then turn off automatically. light switch to the “OFF” position. 2. Put the light switch back to the “ ” or “ ” position again and get out of the vehicle. 3-82

owners manual Mitsubishi Galant

owners manual Mitsubishi Galant - year of production: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012 - Mitsubishi Galant IX 9 owners manual EN