or
owners manual Audi R8
owners manual Audi R8 - year of production: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015 - Audi R8 I 1 owners manual EN
Document:
pdf (8.51 MB) 210 pages
all ratings: 0
average rating: 5
text version of content this owner's manual page
from owners manual to the vehicle Audi R8, year of production 2006 - 2015:
document_0900452a816e6cc9.book Seite 168 Mittwoch, 21. Februar 2007 1:32 13
168 Wheels and tyres
Tread wear indicators WARNING (continued)
The tread wear indicators show the condition of the tyre aquaplaning in deep puddles of water and when driving through
treads. corners. Braking is also adversely affected.
• The speed has to be adapted accordingly, otherwise there is a
risk of losing control over the vehicle.
Replacing wheels and tyres
It is important to use the correct wheels and tyres when
replacement is necessary.
Fig. 122 Tyre tread: – All four wheels must be fitted with tyres of the same type
Tread wear indicators and preferably the same tread pattern.
The original tyres on your vehicle have 1.6 mm high “tread wear – If possible, tyres should be re placed at least in pairs and
indicators” ⇒ fig. 122 running across the tread. Depending on the not individually (i.e. both front tyres or both rear tyres
make, there will be 6 to 8 of them spaced at equal distances around together).
the tyre. Markings on the tyre sidewall (for instance the letters “TWI” – Never use tyres whose actual size exceeds the dimen-
or a triangle) indicate the positions of the tread wear indicators. sions of the factory-approved makes of tyre.
The minimum tread depth required by law in Germany is 1.6 mm – If you wish to fit the vehicle with non-standard rims or
(measured in the tread grooves next to the tread wear indicators). tyres, it is advisable to consult an Audi R8 dealerbe fore
Different figures may apply in other countries. purchasing them.
WARNING The tyres and wheel rims are an essential part of the vehicle's
To avoid putting safety at risk, the tyres must be replaced at the design. The tyres and rims approved by Audi are specially matched
latest when the tread is worn down to the tread wear indicators. to the characteristics of the vehicle and make a major contribution
• Especially in difficult driving conditions such as wet or icy to good roadholding and safe handling ⇒ .
roads, it is important that the tyres have sufficient tread depth. The sizes of the rims and tyres approved for your vehicle are listed
The tread depth should same on th e tyres of both the front and the in the vehicle's documents (e.g. EC Certificate of Conformity or COC
document 2)). The vehicle documents vary depending on the
rear axles. country of residence.
• The decrease in driving safety du e to insufficient tread depth is
particularly evident in vehicle handling, when there is a risk of
2)COC = Certificate of conformity
Download PDF
Click here to download a pdf file with an instruction manual for Audi R8
year of production from: 2006
Do you prefer pdf format?
Find out how to download
Enter the code to download PDF file:
All pages in one PDF file!
How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.
:
Audi R8 I 1 owners manual
pages 167 - 173
Audi R8 I 1 owners manual
page 170 / 210
this site is maintained by advertising - for view instructions, turn off ad blocking in your browser
Download PDF
Others owner's manuals for this model: