owners manual Volvo XC60

all ratings: 0 average rating: 5

04 Comfort and driving pleasure City Safety’ Limitations NOTE Cause Action The sensor used by City Safety™ is designed• Keep the windshield in front of the laser to detect cars and other larger motor vehiclessensor free of ice, snow, dirt, etc. SeeThe area of theClean the wind- ahead of your vehicle in both daylight and dark-page 168. windshield in front ofshield or remove the ness. the sensor is dirty orice/snow. However, there are certain limitations and the• Snow or ice on the hood deeper thancovered by ice or 2 inches (5 cm) may obstruct the sen-snow. laser sensor’s function may be reduced by, forsor. Keep the hood free of ice and snow. example, heavy rain or snowfall, or by dense• Do not mount or in any way attach any-The laser sensor'sRemove the fog or thick, blowing dust or snow. Condensa-thing on the windshield that couldfield of view isobstruction. tion, dirt, ice or snow on the windshield mayobstruct the laser sensor.obstructed. also interfere with the sensor’s function. 04 Objects such as warning flags hanging fromTroubleshooting CAUTION long objects on the roof or accessories such as If a crack, scratch or stone chip should auxiliary lights or protective arches on the frontIf Windscreen Sensors blocked appears inoccur in the section of the windshield in of the vehicle that are higher than the hood maythe information display, this indicates that thefront the laser sensor and covers an area of also impede the sensor’s function.City Safety™ laser sensor is obstructed inapproximately 1/50 x 1/10 in. (0.5 x 3 mm) Braking distance to the vehicle ahead increa-some way and cannot detect vehicles ahead ofor larger, contact a trained and qualified ses on slippery road surfaces, which mayyou, which means that the system is not func-Volvo service technician to repair or replace reduce City Safety’s capacity to avoid a colli-tioning. the windshield (see the illustration showing sion. In situations like this, the DSTC systemHowever, this message will not be displayed inthe location of the sensor on page 168). Failing to do so may result in reduced City (see page 149) will help provide the best pos-all situations in which the sensor is obstructed.Safety™ functionality. sible braking capacity and stability.For this reason, the driver must ensure that theTo help prevent reduced functionality, City Safety™ emits infrared light and measuresarea of the windshield in front of the sensor isplease also observe the following: the way in which the light is reflected. There-always kept clean.• If the windshield is replaced, use the fore, vehicles or objects with low-reflective sur-The following table shows some of the situa-same type or a windshield approved by faces may not be detected. Normally, thetions that can cause the message to be dis-Volvo. license plate and taillight reflectors give theplayed and suggested actions.• When replacing windshield wipers, use rear section of a vehicle ahead sufficient reflec- the same type or ones approved by tive surfaces to be detected. Volvo.  169

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders