owners manual Nissan Titan

all ratings: 0 average rating: 5

● If the battery cable is disconnected, or if theThe driver’s seat, accelerator and brake pedals,● When the ignition switch is turned from fuseopens,thememorystoragefunctionwilland outside mirrors will move to the memorizedACCtoONwhiletheshiftselectorisintheP becanceledandmustberestartedbeforeaposition with the indicator light blinking, and then(Park) position. stored memory position can be set again.thelight will stay on for approximately 5 seconds.The entry/exit function can be adjusted or can- Drive the vehicle over 25 MPH (40 km/h) toENTRY/EXITFUNCTIONceled. For vehicles with a navigation system, see restart the memory storage function. You “Vehicle electronic systems” in the “Display canalsorestartthememorystoragefunctionThis system is designed so that the driver’s seatscreen, heater, air conditioner, audio and phone using the following procedure.will automatically move when the shift selector issystems” section of this manual. For vehicles 1. Connect the battery cable or replace theplaced in the P (Park) position. This allows thewithout navigation system, see your NISSAN fuse. driver to get into and out of the driver’s seat moredealer. easily. 2. Openandclosethedriver’s door more thanThe driver’s seat will slide backward:Restarting the entry/exit function 2timeswiththeignition switch in the LOCK If the battery cable is disconnected or if the fuse position. ● When the key is removed from the ignitionopens, the entry/exit function will be disabled. Oncethememorystoragefunctionhasbeenswitch and the driver’s door is opened.Drive the vehicle over 25 MPH (40 km/h) to restarted, you can store a memory position.● When the driver’s door is opened with therestarttheentry/exitfunction.Youcanalsorestart See “Memory storage function” in this sec-ignition switch placed in the LOCK position.the entry/exit function using the following proce- tion. ● When the ignition switch is turned fromdure. Selecting the memorized positionACCtoLOCKwiththedriver’sdooropen.1. Connect the battery cable or replace the Set the shift selector to the P (Park) position,The driver’s seat will return to the previous posi-fuse. then: tion: 2. Openandclosethedriver’s door more than ● Within 45 seconds of opening the driver’s● When the key is inserted into the ignition2timeswiththeignition switch in the LOCK door, push the memory switch (1 or 2) orswitch and the driver’s door is closed.position. ● Place the ignition switch in the ON position● When the driver’s door is closed with theTheentry/exitfunctionshouldnowworkproperly. and push the memory switch (1 or 2).ignition switch placed in the LOCK position. 3-26 Pre-driving checks and adjustments

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders