owners manual Seat Leon

all ratings: 0 average rating: 5

164 Driving 1 Driver messages on the instrument panel display – Turn the ignition key to position to switch off the ignition. Press the clutch Preheating is produced in Diesel vehicles  when the ignition is switched on. This message appears on vehicles with a manual gearbox if the driver tries to start the engine without having the clutch pedal pressed. The engine will only start if you press the clutch pedal. Starting up the engine – Manual gearbox: Press the clutch pedal all the way down and Press the brake move the gearbox lever into neutral. This message appears on vehicles with an automatic gearbox if the driver tries to start the engine without having the brake pedal pressed. – Automatic gearbox: Press the brake pedal and move the selec- tor lever to position P or N. Select N or P This message appears if you try to start or stop the engine when the selec- – Turn the ignition key to position 3 . The key returns to position tor lever of the automatic gearbox is not in position P or N. The engine can 2 automatically. Do not press the accelerator. only start or stop in these positions. Diesel engines can take a few seconds longer than usual to start Engage position P; the vehicle can move; doors can only close in position P. on cold days. Therefore the clutch pedal (manual gearbox) or the For safety reasons, this driver message appears and an audible warning brake pedal (automatic gearbox) must remain pressed until the en- sounds if the selector lever of the automatic gearbox is not in position P af- gine starts up. During preheating, the warning lamp  remains lit. ter you switch off the ignition. Otherwise the vehicle could move. The preheating time depends on the coolant and exterior tempera-Gear change: selector lever in the drive position! tures. When the engine is at operating temperature or at outside This driver message is displayed and a buzzer is sounded when the selector temperatures above +8 °C (46 °F) the warning lamp  will only lever is not in the position P when the driver door is opened. Put the selec- light up for about one second. This means that the engine startstor lever in position P; otherwise the vehicle can roll away. immediately. Ignition is switched on If the engine does not immediately start up, interrupt the starting processThis driver message is displayed and a buzzer is sounded when the driver and try again after 30 seconds. To start the engine again, return the key todoor is opened with the ignition switched on. position 1 . Start-Stop System* If the vehicle is stopped and the Start-Stop system* switches off the engine, the ignition remains switched on. Automatic gearbox: Before leaving the vehicle, make sure that the ignition is switched off and the selector lever is in position P.

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders