owners manual Ford Mustang

all ratings: 0 average rating: 5

Driving Aids When you remove a blockage, you can The following are other situations that may reset the system in two ways: limit the Blind Spot Information System: • While driving, the system detects at • Certain maneuvering of vehicles least two objects. entering and exiting the blind zone. • You cycle the ignition from on to off • Vehicles passing through the blind zone and then back on. at very fast rates. If the blockage is still present after the key • When several vehicles forming a cycle and driving in traffic, check again for convoy pass through the blind zone. a blockage. The following are other situations that may Reasons for messages being displayed limit the cross traffic alert system: • Adjacently parked vehicles or objects The radar Clean the fascia area in obstructing the sensors. surface is front of the radar or remove • Approaching vehicles passing at dirty or the obstruction. speeds greater than 37 mph obstructed (60 km/h). The radar Drive normally in traffic for • Driving in reverse faster than 7 mph surface is a few minutes to allow the (12 km/h). not dirty or radar to detect passing • Backing out of an angled parking spot. obstructed vehicles so it can clear the False Alerts blocked state. Heavy rain- No action required. The Note:If your vehicle has a factory equipped fall or system automatically tow bar and it is towing a trailer, the sensors snowfall resets to an unblocked will detect the trailer and turn the Blind Spot interferes state once the rainfall or Information and cross traffic alert systems with the snowfall rate decreases or off to avoid false alerts. For non-factory radar stops. Do not use the Blind equipped tow bars, you may want to switch signals Spot Information System or the Blind Spot Information System off cross traffic alert in these manually. conditions. There may be certain instances when there is a false alert by either the Blind Spot System Limitations Information or the cross traffic alert system The Blind Spot Information and cross that illuminates the alert indicator with no traffic alert systems do have their vehicle in the coverage zone. Some limitations; situations such as severe amount of false alerts are normal; they are weather conditions or debris build-up on temporary and self-correct. the sensor area may limit vehicle detection. System Errors If either system senses a problem with the left or right sensor, the Blind Spot Information System telltale will illuminate and a message will appear in the information display. 162 Mustang (), enUSA, First Printing

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders