BMW X4 F26 owners manual page 164

text version of content this owner's manual page from owners manual to the vehicle BMW X4 F26, year of production 2014:

Seite 164 Controls Interior equipment erases all programming of the buttons onrearview mirror starts flashing rapidly and then the interior rearview mirror. stays lit constantly for 2 seconds, the system features an alternating-code system. Flashing 3. Hold the hand-held transmitter for the sys‐ and continuous illumination of the LED will re‐ tem to be controlled approx. 1 to 3 in/2.5 to peat for approximately 20 seconds. 8 cm away from the buttons of the interior rearview mirror. The required distance de‐For systems with an alternating-code system, pends on the manual transmitter. the universal garage door opener and the sys‐ tem also have to be synchronized. 4. Simultaneously press and hold the button of the desired function on the hand-heldPlease read the operating manual to find out transmitter and the button to be program‐how to synchronize the system. med on the interior rearview mirror. The Synchronizing is easier with the aid of a sec‐ LED on the interior rearview mirror will be‐ ond person. gin flashing slowly. To synchronize: 5. Release both buttons as soon as the LED 1. Park the vehicle within range of the re‐ flashes more rapidly. The LED flashing mote-controlled system. faster indicates that the button on the inte‐ rior rearview mirror has been programmed.2.Program the relevant button on the interior rearview mirror as described. If the LED does not flash faster after at least 60 seconds, change the distance be‐3.Locate and press the synchronizing button tween the interior rearview mirror and the on the system being programmed. You hand-held transmitter and repeat the step. have approx. 30 seconds for the next step. Several more attempts at different distan‐ 4. Hold down the programmed button on the ces may be necessary. Wait at least interior rearview mirror for approximately 15 seconds between attempts. 3 seconds and then release it. If necessary, Canada: if programming with the hand- repeat this step up to three times in order held transmitter was interrupted, hold to finish synchronization. Once synchroni‐ down the interior rearview mirror button zation is complete, the programmed func‐ and repeatedly press and release the tion will be carried out. hand-held transmitter button for 2 sec‐ onds. Reprogramming individual buttons 6. To program other functions on other but‐1. Switch on the ignition. tons, repeat steps 3 to 5. 2. Press and hold the interior rearview mirror The systems can be controlled using the inte‐ button to be programmed. rior rearview mirror buttons. 3. As soon as the interior rearview mirror LED starts flashing slowly, hold the hand-held Special feature of the alternating- transmitter for the system to be controlled code wireless system approx. 1 to 3 in/2.5 to 8 cm away from the If you are unable to operate the system after buttons of the interior rearview mirror. The repeated programming, please check if the required distance depends on the manual system to be controlled features an alternat‐ transmitter. ing-code system. Read the system's operating manual, or press the programmed button on the interior rear‐ view mirror longer. If the LED on the interior 164 Online Edition for Part no. 01 40 2 964 144 - VI/15

owners manual BMW X4 F26

owners manual BMW X4 F26 - year of production: 2014 - BMW X4 F26 owners manual EN