owners manual Mercedes E

all ratings: 0 average rating: 5

212_AKB; 2; 41, en-US 2009-07-17T09:14:21+02:00 - Seite 162 d2ureepe, Version: 2.11.8.1 162 Driving systems Activating HOLD GWarning! The braking effect of the HOLD function is XMake sure the activation conditions are canceled and the vehicle can start to roll if met. X R Depress the brake pedal. the HOLD function is deactivated by depressing the accelerator pedal or the XContinue to depress the brake pedal with brake pedal increased pedal pressure until the message HOLD appears in the multifunction display.R the HOLD function or the power supply is The HOLD function is activated. You can malfunctioning, e.g. due to battery failure now release the brake pedal. R the electrical components in the engine compartment or the fuses have been manipulated R the battery is disconnected GWarning! Controls in detail Never get out of the vehicle while the HOLD function is activated! Example illustration, HOLD function activated The HOLD function must never be operated iIf the HOLD function is not activated when or deactivated by passengers or from outside depressing the brake pedal, wait briefly andthe vehicle. repeat the above steps. The HOLD function does not replace the parking brake. It must not be used to secure GWarning! the vehicle when parking. The vehicle’s brakes are applied when the Deactivate the HOLD function when leaving HOLD function is activated. Therefore, or parking the vehicle. Use the parking brake deactivate the HOLD function, for example, to secure the vehicle. when the vehicle is pulled through an automatic car wash or being towed. When the HOLD function is activated, the automatic transmission shifts into park Deactivating HOLD position P automatically when R opening the driver’s door and releasing the The HOLD function is switched off when seat belt R you depress the accelerator pedal with the R turning off the engine automatic transmission in drive position D or reverse gear R R opening the hood R you shift the automatic transmission intoR a system malfunction occurs park position P R the on-board voltage is insufficient R you depress the brake pedal fully again The HOLD function is deactivated. until the message HOLD in the multifunction display disappears R you activate the DISTRONIC PLUSAIRMATIC (E 550 and E 550 4MATIC) Introduction The AIRMATIC lets you select the chassis and suspension setup. The chassis and

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders