owners manual Toyota 4Runner

all ratings: 0 average rating: 5

JUMP STARTING PROCEDURE 1. If the booster battery is installed in another vehicle, make sure the ve- hicles are not touching. Turn off all un- necessary lights and accessories. 2. If required, remove all the vent plugs from the booster and discharged bat- teries. Lay a cloth over the open vents on the batteries. (This helps reduce the explosion hazard, personal injuries and burns.) 3. If the engine in the vehicle with the booster battery is not running, start it and let it run for a few minutes. During4. Make the cable connection in the orderc.Connect the clamp of the negative jump starting, run the engine at abouta, b, c, d.(black) cable to the negative (-) termi- 2000 rpm with the accelerator pedal nal on the booster battery. lightly depressed. a.Connect the clamp of the positived.Connect the clamp at the other (red) jumper cable to the positive (+) terminal on the discharged battery.end of the negative (black) jumper cable to a solid, stationary, b.Connect the clamp at the other end of the positive (red) jumper cableun-painted, metallic point of the ve- hicle with the discharged battery. to the positive (+) terminal on the booster battery. The recommended connecting points are shown in the following illustration: 163

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders