owners manual Ford Mustang

all ratings: 0 average rating: 5

Cruise Control Disengaging the System Resuming the Set Speed Press the brake pedal, press CNCL, or Note:Only use resume if you are aware of press the clutch pedal (if equipped). The the set speed and intend to return to it. last set speed displays in grey but will not Press and release RES. The vehicle will erase. return to the previously set speed. The set Overriding the System speed will display continuously in the information display while the system is WARNING active. Whenever the driver is overriding the Automatic Cancellation system by pressing the accelerator The system is not functional at vehicle pedal, the system will not speeds below 12 mph (20 km/h). An automatically apply the brakes to maintain audible alarm will sound and the separation from any vehicle ahead. automatic braking releases if the vehicle You can override the set speed and gap drops below this speed. The system will distance by pressing the accelerator pedal. cancel at low speeds if you switch off electronic stability control. When you override the system, Hilly Condition Usage the green indicator light E144529 illuminates and the lead vehicle Note:An audible alarm will sound and the graphic does not show in the system will shut down if it is applying brakes information display. for an extended period of time. This allows The system will resume operation when the brakes to cool down. The system will you release the accelerator pedal. The function normally again when the brakes vehicle speed will decrease to the set have cooled down. speed, or a lower speed if following a You should select a lower gear position slower vehicle. when the system is active in situations Changing the Set Speed such as prolonged downhill driving on steep grades, for example in mountainous • Accelerate or brake to the desired areas. The system needs additional engine speed, then press and release SET+. braking in these situations to reduce the • Press and hold SET+ or SET- until the load on the vehicle’s regular brake system desired set speed shows on the to prevent them from overheating. information display. The vehicle speed Switching the System Off will gradually change to the selected Note:The set speed memory erases when speed. you switch off the system. • Press and release SET+ or SET-. The Press and release OFF or turn off the set speed will change in approximately ignition. 1 mph (2 km/h) increments. The system may apply the brakes to slow the vehicle to the new set speed. The set speed will display continuously in the information display while the system is active. 156 Mustang (), enUSA, First Printing

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders