or
owners manual Ford B-Max
owners manual Ford B-Max - year of production: 2012 - Ford B Max owners manual EN
Document:
pdf (20.31 MB) 256 pages
all ratings: 0
average rating: 5
text version of content this owner's manual page
from owners manual to the vehicle Ford B-Max, year of production 2012:
Wheels and Tyres
C Sealant bottle hose 12.Inflate the tyre for no longer than 10
D Bottle holder minutes to an inflation pressure of
minimum 26 psi (1.8 bar) and a
E Pressure gauge maximum of 51 psi (3.5 bar). Move
F Power plug with cable the compressor switch G to position
0 and che ck the c urrent tyre pressure
G Compressor switch with pressure gauge E.
H Repair kit hose Note:If a tyre pressure of 26 psi (1.8 bar)
I Pressure relief valve is not reached do not continue.
Note:When pumping in the sealant thr ough
1.Remove the kit from the wrapping.the tyre valve, the pressure may rise up to
2.Peel off the label A showing the87 psi (6 bar) but will drop again after about
maximum permissible speed of30 seconds.
50 mph (80 km/h) from the sealant13.Remove the power plug F from the
bottle and attach it to the instrumentcigar light er socket or a uxiliary power
panel in the driv er’s field of view. Makesocket.
sure the label does not obscure14.Quickly unscrew the hose C from the
anything important. tyre valve. Fasten the v alve cap again.
3.Take the ho se H with the pressure relief15.Leave the sealant bottle B in the
valve I and the power plug with cablebottle holder D.
F out of the kit. 16.Make sure the kit is stored safely, but
4. Connect the hose H with the pressurestill easily accessible in your vehicle.
relief valve I to the sealant bottle B.The kit will be required again when
5.Engage the sealant bottle B into theyou check the tyre pressure.
bottle holder D. 17.Immediately drive approximately
6. Remove the valve cap from the two miles (three kilometres) so that
damaged tyre. the sealant can seal the damaged
7.Screw the sealant bottle hose C firmlyarea.
onto the valve of the damaged tyre. WARNING
8. Make sure that the compressor switchIf you experience heavy vibrations,
G is in position 0. unsteady steering behavior or nois es
9. Insert the power plug F into the cigarwhile driving, reduce your speed and
lighter socket or a uxiliary po wer socket.drive with caution to a place where it is
See Cigar Lighter (page 81). Seesafe for you to stop your vehicle. Recheck
Auxiliary Power Points (page 81).the tyre and its pressure. If the tyre
10.Start the engine. pressure is less than 14.7 psi (1 bar) or if
11.Move the compressor switch G tothere are any cracks, bumps or similar
position 1. damage visible, do not continue driving
with this tyre.
157
Download PDF
Click here to download a pdf file with an instruction manual for Ford B-Max
year of production from: 2012
Do you prefer pdf format?
Find out how to download
Enter the code to download PDF file:
All pages in one PDF file!
How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.
:
Ford B Max owners manual
pages 156 - 162
Ford B Max owners manual
page 159 / 256
this site is maintained by advertising - for view instructions, turn off ad blocking in your browser
Download PDF