owners manual Subaru Outback

owners manual Subaru Outback - year of production: 2009, 2010, 2011, 2012, 2013, 2014 - Subaru Outback Legacy IV 4 owners manual EN

Document: pdf (18.3 MB) 474 pages

all ratings: 0 average rating: 5

text version of content this owner's manual page from owners manual to the vehicle Subaru Outback, year of production 2009 - 2014:

3-38 Instruments and controls If the ignition switch is turned to the “OFF”mode,pressandholdthepowerbuttonfor!Compasszoneadjustment position, the display setting returns to the12to15secondswhilethetransmissionis on mode as a default setting the next timein the “R” (reverse) position, and then the ignition switch is turned to the “ON”release it. The display is now in the non- position. operational mode. After the display has !Languagemodechange been set to the non-operational mode, the function indicator will illuminate in orange Thelanguagemodeofthecaptionsonthewhilethetransmissionisint“Rh”e rear view image display is selectable in(reverse) position. English or French in the following ways. 1. Press and hold the power button for 6To return the display to the operational to 12 seconds while the transmission is inmode,pressandholdthepowerbuttonfor the “R” (reverse) position, and then12 to 15 seconds again. release it. The display will enter the For precautions about the rear view language selection mode. camera and the rear view image, refer toCompass calibration zones 2. Briefly press the power button to “Rear view camera” F6-19. toggle the captions on the display in 1. Refer to the “Compass calibration English or French. ! Electronic compass display zones” map shown above to verify that 3. By releasing the power button for 5By briefly pressing the compass button,the compass zone setting is correct for seconds, the display blinks one time tothe compass display is toggled on or off.your geographical location. show that the language mode is selected.When the compass display is on, an2. Press and hold the compass button for illuminated compass reading will appear3 to 6 seconds, and then release it. The !Non-operational mode on the mirror. zone number will be shown on the Using the electronic compass properly,electronic compass display. Therear view image display can be set as 3. Press the compass button repeatedly non-operational. After setting the displaythe following compass zone adjustment to the non-operational mode, the displayand compass calibration will be neces-until the correct zone number for your doesnotshowtherearviewimageevenifsary. location is displayed. the ignition switch is reset (turning the 4. Releasing the button for 3 seconds will ignition switch to the “ON” position after exit the zone setting mode. turning it to the “OFF” position). To set the display to the non-operational

Download PDF

Click here to download a pdf file with an instruction manual for Subaru Outback
year of production from: 2009

Do you prefer pdf format?
Find out how to download

Enter the code to download PDF file:

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.