owners manual Mercedes E

all ratings: 0 average rating: 5

212_AKB; 2; 41, en-US 2009-07-17T09:14:21+02:00 - Seite 154 d2ureepe, Version: 2.11.8.1 154 Driving systems If the preceding vehicle is stationary, you can Switching on while driving only switch on the DISTRONIC PLUS if your You can switch on the DISTRONIC PLUS when vehicle is also at a standstill. the vehicle speed is above 20 mph XPull the DISTRONIC PLUS lever briefly in (30 km/h). direction of arrow ?. Below 20 mph (30 km/h), you can only switch The DISTRONIC PLUS is switched on. on the DISTRONIC PLUS if the preceding XTap the DISTRONIC PLUS lever up : or vehicle has been detected and is shown in the down ; until desired speed is set. multifunction display. If you no longer see the preceding vehicle in the multifunction display You can adjust the set speed using the and if it is no longer detected because it has DISTRONIC PLUS lever and the target changed lanes, for example, the DISTRONIC distance using the distance setting switch on PLUS switches off and a signal sounds. the DISTRONIC PLUS lever (Y page 157). XPull the DISTRONIC PLUS lever briefly in iIf the DISTRONIC PLUS is switched off, direction of arrow ? to call up the last set ® the PRE-SAFE Brake (Y page 69) will warn speed, or if no speed is stored, to set and of an impending collision if this function has Controls in detail store the current speed. been activated with the instrument cluster The DISTRONIC PLUS is switched on. control system (Y page 137). or Starting off XTap the DISTRONIC PLUS lever up : or When the preceding vehicle starts off: down ; until desired speed is set. The DISTRONIC PLUS is switched on.XRemove your foot from the brake pedal. XRemove your foot from the acceleratorX Pull the DISTRONIC PLUS lever briefly in pedal. direction of arrow ?. Your vehicle adapts its speed to the or preceding vehicle, observing the set speed XBriefly step on the accelerator pedal. as a maximum value. Your vehicle starts off and adapts its speed If you do not completely remove your foot to the preceding vehicle. from the accelerator pedal, the message DISTRONIC PLUS Override appears in the Driving multifunction display. The distance to a slower-driving vehicle will not be set. You will If there is no preceding vehicle, the drive at the speed you dictate by pressing the DISTRONIC PLUS functions like the cruise accelerator pedal. control (Y page 146). When the DISTRONIC PLUS detects that the Switching on when approaching a preceding vehicle is driving more slowly, it stationary vehicle brakes the vehicle in order to keep the distance specified by you. It is helpful to switch on the DISTRONIC PLUS display in the multifunction display to see thatWhen the DISTRONIC PLUS detects that the a preceding vehicle is detected preceding vehicle is driving faster, it (Y page 152). You can only switch on theaccelerates the vehicle up to the set speed. DISTRONIC PLUS below a speed of 20 mph GWarning! (30 km/h) when a preceding vehicle is When you step on the brake pedal, you switch detected. off the DISTRONIC PLUS except when the vehicle is at a standstill. The DISTRONIC PLUS

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders