owners manual Chevrolet Suburban

owners manual Chevrolet Suburban - year of production: 2000, 2001, 2002, 2003, 2004, 2005, 2006 - Chevrolet GMC Suburban IX 9 owners manual EN

Document: pdf (3.65 MB) 556 pages

all ratings: 0 average rating: 5

text version of content this owner's manual page from owners manual to the vehicle Chevrolet Suburban, year of production 2000 - 2006:

® It is recommended that a new battery be installed in Programming the HomeLink your hand-held transmitter for quicker and more Transmitter accurate transmission of the radio frequency. Do not use the HomeLink® Transmitter with any garage Your vehicle’s engine should be turned off while door opener that does not have the “stop and reverse” programming the transmitter. Follow these steps to feature. This includes any garage door opener model program up to three channels: manufactured before April 1, 1982. If you have a newer 1. Press and hold down the two outside buttons, garage door opener with rolling codes, please be releasing only when the indicator light begins to sure to follow steps 6 through 8 to complete the ﬂash, after 20 seconds. Do not hold down the ® programming of your HomeLink Transmitter. buttons for longer than 30 seconds and do not Read the instructions completely before attempting to repeat this step to program a second and/or third ® ® program the HomeLink Transmitter. Because of transmitter to the remaining two HomeLink buttons. the steps involved, it may be helpful to have another 2. Position the end of your hand-held transmitter about person available to assist you in programming the ® transmitter. 1 to 3 inches (3 to 8 cm) away from the HomeLink buttons while keeping the indicator light in view. Keep the original transmitter for use in other vehicles as 3. Simultaneously press and hold both the desired ® ® well as for future HomeLink programming. It is also button on HomeLink and the hand-held transmitter recommended that upon the sale of the vehicle, button. Do not release the buttons until Step 4 the programmed HomeLink® buttons should be erased has been completed. ® for security purposes. Refer to “Erasing HomeLink Some entry gates and garage door openers may ® Buttons” or, for assistance, contact HomeLink on the require you to substitute Step 3 with the procedure internet at: www.homelink.com or by calling noted in “Gate Operator and Canadian 1-800-355-3515. Programming” later in this section. Be sure that people and objects are clear of the garage 4. The indicator light will ﬂash slowly at ﬁrst and then door or gate operator you are programming. When ® programming a garage door, it is advised to park outside rapidly after HomeLink successfully receives the of the garage. frequency signal from the hand-held transmitter. Release both buttons. 2-59

Download PDF

Click here to download a pdf file with an instruction manual for Chevrolet Suburban
year of production from: 2000

Do you prefer pdf format?
Find out how to download

Enter the code to download PDF file:

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.