owners manual Skoda Rapid

all ratings: 0 average rating: 5

Connecting 3ARNING ›First, connect the positive  first, then the negative  battery terminal. ■ 3hen you charge a battery, hydrogen is released, and a highly explosive gas mixture is also produced. An explosion can be caused through sparkling After disconnecting and re-connecting the vehicle battery, the following func- over during unclamping or loosening of the cable plug while the ignition is tions or devices are partially or completely inoperative. on. ■ Creating a bridge between the poles on the battery (e.g. with metal ob-Function / device Commissioning jects - cables) creates a short circuit - risk of damage to the battery, explo- 0ime settings » page ĘĖ sion and burning of the battery, jets of acid spurting out. ■ Avoid creating sparks when working with cables and electrical devices. CA10ION Strong sparking represents a risk of injury. ■ Disconnect the vehicle battery only with the ignition turned off - there is a ■ Before carrying out any work on the electrical system, switch off the en- risk of damaging the electrical system of the vehicle. gine, the ignition and all electrical consumers and disconnect the negative ■ 1nder no circumstances must the battery cables be connected incorrectly – terminal . risk of a cable fire. ■ “Quick-charging” the vehicle battery is dangerous and requires a special charger and specialist knowledge. Note ■ 3e therefore recommend that vehicle batteries be “rapidly charged” by a ■ After disconnecting and re-connecting the vehicle battery, we recommend specialist garage. having the vehicle checked by a specialist to ensure that the full functionality of all electrical systems is guaranteed. CA10ION ■ 0he data of the multi-function display will be reset. On vehicles with the S0AR0/S0OP system, the pole terminal of the charger must not be connected directly to the negative terminal of the vehicle battery,Automatic load deactivation but only to the engine earth » page Ėěĝ, Jump-starting using the battery from Read and observe and on page ĖĚĖ first. another vehicle. 0he vehicle's electrical system automatically prevents the battery from dis- Replacing charging when the battery is being heavily used. 0his manifests itself by the following. Read and observe and on page ĖĚĖ first. ▶ 0he idling speed is raised to allow the generator to deliver more electricity to the electrical system. 0he new vehicle battery must have the same capacity, voltage, current and ▶ 3here necessary, large convenience consumers such as seat heaters and size as the original battery. Suitable vehicle battery types can be purchased rear window heaters have their power limited or are shut off completely in from a specialist garage. the event of an emergency. 3e recommend you have the battery replaced by a specialist garage. CA10ION Disconnecting and reconnecting ■ Despite such intervention by the vehicle electric system management, the vehicle battery may be drained. For example, when the ignition is switched on Read and observe and on page ĖĚĖ first. a long time with the engine turned off or the side or parking lights are turned on during longer parking. Disconnecting ■ Consumers that are supplied via a Ėė-2 power socket can cause the vehicle ›Switch off the ignition.  battery to discharge when the ignition is switched off. ›First, disconnect the negative terminal  first, then the positive  terminal of the battery. Inspecting and replenishingĖĚĘ

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders