owners manual Mercedes C

all ratings: 0 average rating: 5

BA 204 USA, CA Edition A 2011; 1; 5, en-US 2010-05-20T09:17:30+02:00 - Seite 153 hereepe Version: 3.0.3.6 Driving tips 153 GWarning GWarning If other than recommended brake pads areMake sure that you do not endanger other installed, or other than recommended brakeroad users when you apply the brakes. fluid is used, the braking properties of the You can find a description of Brake Assist vehicle can be degraded to an extent that safe (BAS) on (Y page 62). braking is substantially impaired. This could result in an accident. High-performance brake system for ! Vehicles with 4MATIC: a function or AMG vehicles performance test may only be carried out The high-performance brake system is only on a two-axle dynamometer. If you are installed on the C 63 AMG. planning to have the vehicle tested on such a dynamometer, contact an authorized Warning G Mercedes-Benz Center to obtain further New vehicle brake pads and discs, and information first. Otherwise, the drive train Driving and parking replacement brake pads and discs may take or the brake system may suffer damage. several hundred miles of driving until they ® provide optimum braking efficiency. Until that ! Vehicles with 4MATIC: as the ESP time, you may need to use increased brake system operates automatically, the engine pedal pressure while braking. Please be aware and the ignition must be switched off of this and adjust your driving and braking (SmartKey in position 0 or 1 in the ignition accordingly during this break-in period. lock or Start/Stop button in position 0 or Excessive high-demand braking will cause 1) while the parking brake is being tested correspondingly high brake wear. Please be on a brake dynamometer. attentive to the brake warning lamp in the Braking maneuvers triggered automatically instrument cluster and brake condition ® by ESP may seriously damage the brake messages in the multifunction display. system. Especially for high performance driving, it is ® ! Vehicles with 4MATIC: as the ESP important to maintain and have the brake system operates automatically, the enginesystem checked regularly. and the ignition system must be switched The high-performance brake system is off (SmartKey in position 0 or 1 in the designed for heavy loads. This may lead to ignition lock or Start/Stop button in noise when braking. This will depend on: position 0 or 1) when: R R speed testing the parking brake on a brake dynamometer. R braking force R R you intend to have the vehicle towed withenvironmental conditions, such as the front axle raised. temperature and humidity Braking maneuvers triggered automaticallyThe wear of individual components of the ® by ESP may seriously damage the brakebrake system, such as the brake pads/linings system. or brake discs, depends on the individual driving style and operating conditions. If your brake system is only subjected to moderate loads, you should regularly test your brake system's function by forcefully depressing the brake pedal when driving at high speed. This will give the brake pads better grip. Z

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders