owners manual Seat Mii

all ratings: 0 average rating: 5

Advice Topping up the engine coolant level ● Always wait until the engine has complete-cess coolant will be forced out of the cooling ● ly cooled before very carefully opening thesystem when the engine is hot, causing dam- Always protect your face, hands and arms expansion tank cap. Contact with hot ele-age. from hot coolant and steam using a large, ments of the engine can cause skin burns. thick cloth over the coolant expansion tank ● If a lot of liquid coolant has been lost, wait ● When the engine is warm or hot, the cool-for the engine to cool down completely before cap. ing system is pressurised. Do not unscrewadding coolant. Extensive coolant loss is an ●Remove the cap very carefully ››› . the cap on the expansion tank when the en-indication of leaks in the engine cooling sys- ● engine coolant ac- Only refill using new gine is hot. Otherwise, coolant may spray outtem. Have the engine cooling system inspec- cording to SEAT specifications (››› page 150)under pressure causing burns and serious in-ted immediately by a specialised workshop. ››› . jury. Otherwise engine damage may occur. ● – Carefully and slowly unscrew the cap an-● When refilling or changing service liquids, The engine coolant level should be be- ti-clockwise, gently pressing down on it.ensure that you put the liquids into the right tween the marks on the coolant expansion tank. Making a mistake when refilling could . tank ››› Fig. 109 Do not exceed the top level– Always protect your face, hands and arms cause serious malfunctions and damage the of the marked area ››› . from hot coolant and steam using a large, engine! thick cloth. ●Screw on the cap tightly. ● When refilling liquids, avoid spilling them ●If, in the event of an emergency, you have on parts of the engine and the exhaust sys- no coolant that is compliant to the required tem. Spilled liquids could cause a fire. Under Brake fluid specifications (››› page 150), do not use an- specific circumstances, the ethylene glycol other type of additive. Instead, top up with can catch fire. distilled water only ››› . Then re-establish Checking the brake fluid level the correct proportion of the mixture with the CAUTION correct additive as soon as possible ››› page 150. ● Top up with distilled water only. Any other type of water may lead to considerable rust- ing in the engine due to its chemical compo- WARNING nents. This could consequently damage the Hot vapours and coolant can cause serious engine. If you have not used distilled water burns. but another type of water to top up the cool- ● Never open the coolant expansion tank if ant, a specialised workshop must immediate- steam or coolant is coming from the enginely replace all of the fluid in the engine cooling compartment. Wait until you cannot see orsystem. hear any steam or coolant escaping. ● Only top up coolant to the top level of the Fig. 111 In the engine compartment: brake marked area ››› Fig. 109. Otherwise the ex- fluid reservoir, lid 152

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders