owners manual KIA Rio

owners manual KIA Rio - year of production: 1999, 2000, 2001, 2002, 2003, 2004, 2005 - Kia Rio I Pride Saipa owners manual EN

Document: pdf (2.73 MB) 238 pages

all ratings: 1 average rating: 2

text version of content this owner's manual page from owners manual to the vehicle KIA Rio, year of production 1999 - 2005:

RIO ENG CNA 6.qxd 7/29/05 5:15 PM Page 3 2. Make sure the air conditioner is off.4. The coolant level should then be checked. If the level in the reservoir is low, look for leaks at the 3. If coolant or steam is boiling out of the radiator, stop the engine, then turn the ignition switch to theradiator hoses and connections, heater hoses and ON position. Do not restart the engine. The radiator connections, radiator, and water pump. If you find a cooling fan will automatically operate with themajor leak or another problem that may have ignition switch in the ON position. If the cooling caused the engine to overheat, do not operate the fan does not operate, call an Authorized Kia Dealerengine until the problem has been corrected. Call for assistance. an Authorized Kia Dealer for assistance. If coolant is not boiling out, allow the engine toIf you do not find a leak or other problem, carefully add coolant to the reservoir. idle and open the hood to permit the engine to cool gradually. If the temperature does not go down with theWARNING - Removing engine idling, stop the engine and allow sufficientRadiator Cap time for it to cool. Do not remove the radiator cap when the engine and radiator are hot. Scalding hot coolant and steam may blow out under pressure. This could cause serious injury. If the engine frequently overheats, have the cooling system checked and repaired. 6-3

Download PDF

Click here to download a pdf file with an instruction manual for KIA Rio
year of production from: 1999

Do you prefer pdf format?
Find out how to download

Enter the code to download PDF file:

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.