Nissan Qashqai II 2 owners manual page 151

text version of content this owner's manual page from owners manual to the vehicle Nissan Qashqai, year of production 2013:

Do not adjust the positioning of the heating/1. Press the AUTO button (the indicator light willAirflow control buttons: • ventilation or air conditioning controls whileilluminate).Use these buttons to manually select the air flow driving. 2. Operatethedriver’ssidetemperaturecontroldialform these outlets as described below: NOTE to set the desired temperature.: Air flows mainly from the windscreen defog- • Theair conditioner cooling function operatesAdjust the temperature to about 22°C (72°F) forger outlets. only when the engine is running, and the am-normal operation.: Air flows from centre and side vents. bient temperature is above -2°C (28°F).3. Driver’s side and passenger side temperatures: Air flows mainly from floor outlets. • Theairconditionercanbeusedtodehumidifycan be set independently using the individualWindscreen defogger m(manual mode): when heating, or to reduce air temperaturetemperature control dial. When the passenger anddehumidifywhencooling.Thisispossiblesidetemperaturecontroldialisturned,theDUALUsethis mode for defogging the windscreen as fol- in both auto or manual control mode as longindicator light will come on. To turn off the pas-lows: as the fan speed is at minimum (first bar) orsengersidetemperaturecontrol,presstheDUAL1. Press thebutton. higher. button. The system will set the fan speed to maximum. • When the AUTO mode is selected, the tem-NOTE Air circulation is cancelled, the airflow mode perature of the passenger compartment will• A visible mist may be seen coming from theandtheair conditioner is activated automatically. bemaintainedautomatically.Airflowdistribu-vents in hot, humid conditions as the air isAir flows mainly from the defogger outlets. tion and fan speed will also be controlled au-cooled rapidly, this is not a malfunction.2. To switch off, press thebutton to return to tomatically. the previous mode or the AUTO button for auto Controls Heating (AUTO mode): climate control mode. Usethis mode for heating purposes only.NOTE NOTE 1. Press the A/C button to turn off the air condi- Before any selection or change is made, presstioner cooling function (A/C indicator light goes• Toquicklydefrost/defogthewindscreen,set the AUTO button to activate the heater and airoff). the fan speed to the maximum position. conditioner system. 2. Selectthedesiredtemperaturewiththetempera-• Assoonaspossibleafterthewindscreenhas Cooling and/or dehumidified heating (AUTOture control dial. been cleared of ice or fog, press either the mode): windscreen defogger button or AUTO button. This mode may be used all year round. The system• Donotsetthe temperature at a lower level than• Whenthewindscreendefoggingmodeisacti- works automatically to control the inside tempera-the one of the outside air temperature. Other-vated, the air conditioner will automatically ture, air flow distribution and fan speed after thewise the system may not work properly.switchonatoutsidetemperaturesabove–2°C preferred temperature is set manually.• Thismodeisnotrecommendedifthewindscreen(28°F) and the air recirculation mode will be fogs up. switched off. Display screen, heater and air conditioner, and audio system4-21

owners manual Nissan Qashqai

owners manual Nissan Qashqai - year of production: 2013 - Nissan Qashqai II 2 owners manual EN