or
owners manual Suzuki SX4 S-Cross
owners manual Suzuki SX4 S-Cross - year of production: 2013 - Suzuki SX4 S Cross owners manual EN
Document:
pdf (16.28 MB) 454 pages
all ratings: 0
average rating: 5
text version of content this owner's manual page
from owners manual to the vehicle Suzuki SX4 S-Cross, year of production 2013:
OPERATING YOUR VEHICLE
If you are unable to start the engine using Restarting diesel engine after fuel-
this procedure, consult your SUZUKI empty stop EXAMPLE
dealer. If the engine stops and the low fuel warn-
ing light and the malfunction indicator light
(For Diesel Engine Model) come on, use the following procedure:
Cold engine 1) Fill the fuel tank.
Depress the clutch and brake pedals fully 2) Press the engine switch to change the
and press the engine switch to crank the ignition mode to "ON" for 5-10 seconds
engine. If the glow plug indicator light to feed fuel.
comes on, the engine will start automati-3) Perform above engine starting proce-
cally after the glow plug indicator light goes dure to start the engine.
10 seconds past. If the malfunction indicator light still comes
off or on after the engine started, there may be
NOTICE some problem with the engine. Ask your
SUZUKI dealer to have the engine 58MST0302
Do not crank the engine for more inspected. 1) Make sure the parking brake is set fully.
than 30 seconds at a time. If the master warning indicator light 2) Manual Transaxle - Shift to "N" (Neu-
If the engine doesn't start on the first blinks and the engine cannot be started tral) and fully depress the clutch pedal.
try, wait about 15 seconds before try- Your keyless push start system remote Hold the clutch and brake pedals fully
ing again. controller may not be sensed as being depressed.
within the "interior workable area". Try CVT - If the gearshift lever is not in the
Warm engine again after making sure that you have the "P" (Park) position, shift it to "P". Hold
Crank the engine by pressing the engine remote controller with you. If the engine the brake pedal fully depressed.
switch to change the ignition mode to still cannot be started, the battery of the 3) The "PUSH START SWITCH." mes-
"START". remote controller may be discharged. You sage will appear on the information dis-
must then use the following method to be play in the instrument cluster. Press the
Caution when stopping the engine with able to start the engine. engine switch (1).
turbocharger 4) Within about 10 seconds of blinking of
When stopping the engine after climbing or the master warning indicator
light in the
high speed driving, let the engine idle for instrument cluster, touch the engine
about one minute or more (if it is not pro- switch with the "LOCK" button end of
hibited) to cool down the turbocharger and the remote controller (2) for about 2
engine
oil. This is to prevent the engine oil seconds.
from over-deteriorating. Deteriorated
engine
oil will damage the bearings of the
turbocharger.
3-16
Download PDF
Click here to download a pdf file with an instruction manual for Suzuki SX4 S-Cross
year of production from: 2013
Do you prefer pdf format?
Find out how to download
Enter the code to download PDF file:
All pages in one PDF file!
How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.
:
Suzuki SX4 S Cross owners manual
pages 148 - 154
Suzuki SX4 S Cross owners manual
page 151 / 454
this site is maintained by advertising - for view instructions, turn off ad blocking in your browser
Download PDF
Others owner's manuals for this model: