owners manual Tesla S

all ratings: 0 average rating: 5

Instructions for Transporters If equipped with a towing eye: Connect the Tow Chain The method used to connect the tow chain1.Remove the nose cone. depends on whether Model S is equipped withInsert a plastic pry tool into the top right a towing eye (located in the front trunk).corner, and gently pry the nose cone If not equipped with a towing eye: toward you. When the clip releases, pull the nose cone toward you, without twisting or bending, to release the three remaining clips. 2.Insert the towing eye. Fully insert the towing eye (found in the front trunk) into the opening on the right side, then turn it counter-clockwise until securely fastened. 1. Attach the tow chains to the large hole on each of the rearmost lower suspension arms underneath the front of the vehicle. 2. To protect the underbody from any damage that could be caused by the tow chains, place a 2" x 4" piece of wood between the tow chains and the underbody. Caution: Before pulling, position the wood between the tow chain and the underbody to ensure the underbody is protected from any damage that could be caused by the tow chain. 3.Attach the tow chain to the towing eye. Caution: Before pulling, make sure the towing eye is securely tightened. Roadside Assistance 151

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders