Nissan Cube III 3 owners manual page 150

text version of content this owner's manual page from owners manual to the vehicle Nissan Cube, year of production 2008:

Black plate (154,1) .To remove frost from the outside surface of4.Turn the temperature control dial to theCooling: the windshield quickly, turn the temperaturedesired position.This modeisusedtocoolanddehumidifytheair. control dial to the maximum hot position andHeating and defogging: the fan speed controldial to maximum 1.Push the air recirculationbutton to (IIII) position. This mode heats the interior and defogs theswitch to the outside air circulation mode. .When theposition is selected, the airwindows. (The indicator light turns off.) conditioner will automatically turn on. This1.Turn the air flow control dial to the2.Turn the air flow control dial to the will dehumidify the air and help to defog theposition.position. windows. The A/C indicator light will illumi- nate when the air conditioner automatically2.Turn the fan speed controldial to the3.Turn the fan speed controldial to the turns on. The air conditioner and A/Cdesired position.desired position. indicator light will remain on in all flow3.Turn the temperature control dial to the4.Push the A/C button on. (The A/C indicator control modes until the A/C button isdesired position.light will illuminate.) pressed or the fan control dial is turned to off. When theposition is selected, the air5.Turn the temperature control dial to the Bi-level heating: conditioner will automatically turn on. This willdesired position between the middle and the dehumidify the air and help to defog thecool (left) position. This mode directs cool air from the side andwindows. The A/C indicator light will illuminate.For quick cooling when the outside tem- center vents and warm air from the foot outlets.when the air conditioner automatically turns on.perature is high, push the air recirculation When the temperature control dial is turned toThe air conditioner and A/C indicator light willbutton to switch to the air recirculation the maximum hot or cool position, the airremain on in all flow control modes until the A/Cmode. (The indicator light turns on.) Be sure between the ventilators and the foot outlets isbutton is pressed or the fan control dial is turnedto push the air recirculation button to the the same temperature. to off. OFF position for normal cooling. 1.Push the air recirculationbutton toAir conditioner operation.Avisible mist may be seen coming from the switch to the outside air circulation mode.The air conditioner system should be operatedventilators in hot, humid conditions as the air (The indicator light turns off.)for approximately 10 minutes at least once ais cooled rapidly. This does not indicate a 2.Turn the air flow control dial to themonth. This helps prevent damage to the airmalfunction. position. conditioner system due to the lack of lubrication. 3.Turn the fan speed controldial to the desired position. 4-8 Heater, air conditioner, audio and phone systems Model "Z12-D" EDITED: 2009/ 9/ 17

owners manual Nissan Cube

owners manual Nissan Cube - year of production: 2008 - Nissan Cube III 3 owners manual EN