owners manual Mini Clubman

all ratings: 0 average rating: 5

Replacing components MOBILITY 4. Unhook the wiper blade toward the wind-clean tissue, cloth or something similar, or hold shield. the bulb by its base.< 5. Pull the wiper blade past the wiper arm You can obtain a selectio n of replacement bulbs toward the top. at your MINI dealer. 6. Insert the new wiper blade. When working on electrical systems, 7. Press into position until you hear it engage.always begin by switching off the con- 8. Fold down the wiper arm. sumer in question; otherwise, short circuits could result. To avoid possible injury or equip- To avoid damage, make sure that the ment damage when replacing bulbs, observe wiper arms are against the windshield any instructions provided by the bulb manufac- before you open the hood.< turer.< Changing the rear wiper blade Caring for headlamps, refer to page143. For any bulb replacement not described below, contact a MINI dealer or a work- shop that has specially trained personnel work- ing in accordance with the specifications of the MINI manufacturer.< For checking and adjusting headlamp aim, please contact your MINI dealer.< Light-emitting diodes LEDs 1. Fold out the wiper arm and hold it.Light-emitting diodes installed behind translu- cent lenses serve as the light sources for many of 2. Press together the locking spring, arrow 1, the controls and displays in your vehicle. These and fold out the wiper blade. light-emitting diodes are related to conven- 3. Pull the wiper blade away from and out of tional laser diodes, and legislation defines them the catch mechanism, arrow 2. as Class 1 light-emitting diodes. 4. Press the new wiper blade into the fixture Do not remove the covers or expose the until it engages audibly. eyes directly to the unfiltered light source for several hours; otherwise, this could cause irritation of the retina.< Lamps and bulbs Headlamp glass lens Lamps and bulbs make an essential contribution In cool or humid weather, condensation may to vehicle safety. They should, therefore, be occur on the interior of outside lights. The con- handled carefully. The manufacturer of your densation disappears a short time after the light MINI recommends having your MINI dealer per-is switched on. The headlamp glasses do not form any work that you do not feel competent to need to be changed. If a lot of moisture is perform yourself or that is not described here.present, e.g. water droplets in the light, have Never touch the glass of new bulbs with them checked by your service center. your bare fingers, as even minute amounts of contamination will burn into the bulb's surface and reduce its service life. Use a Online Online Edition Edition for for Part Part no. no. 01 01 40 40 2 2 607 607 326 326 - - © © 03/11 03/11 BMW BMW AGAG 147

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders