owners manual Mercedes B

all ratings: 0 average rating: 5

High-voltage battery 147 charge current. If necessary, lower the set Display :: charge current or use another power Lights up The external power supplysocket. green connectionisworkingprop- Youcansetalimitforthevaluesofthecharge erly. The high-voltage bat- currentusedinchargingthehigh-voltagebat- tery can be charged. tery. This acts as a means of preventing theng power supply from overloading. You can set Flashes redAmalfunction has been thislimitbyusingthecontrolsonthecharging detected in the external parki cable or in the on-board computer's menu. powersupply.Thehigh-volt- d Only set the maximum charge current in the age battery is recharged as an on-board computer menu if there are no soonastheelectricitysignal charge current settings on the charging registers normal values. ng cable. ivi Lightsupred There is a malfunction. The The default standard value is the minimum charging cable must be Dr charge current setting. This corresponds to removedfromtheelectrical the minimum available charge current from outlet and then re-inserted. the power supply. iThevalueofthemaximumsettingandthe Display ;; relevant adjustment values may vary depending on the country. Lights up There are no malfunctions. Before charging the high-voltage battery, green The high-voltage battery have the maximum permissible charge cur- can be charged. rentfortherelevantpowersocketcheckedby Lightsupred There is a malfunction. The an electrician. high-voltage battery cannot XToadjustthesetting:pressbutton? be charged. repeatedlyuntilthedesiredsettingisselec- ted in display =. For information on problems relating to the RTwoLEDsareflashing:minimumsetting charging process, see (Y page 151). RAll LEDs are flashing: maximum setting Setting the maximum charge current Information about the charging time GWARNING (Y page 334) If the charge current draw via a mains socket If, after the charging process, the charging is too high during the charging process, the cable is: external electrical system may overheat. Rleft connected to the power socket, the There is a risk of fire. currently selected values will be used for Beforebeginningthechargingprocess,check the next charging process. the maximumpermissible charge current Rremovedfromthepowersocket,thevalues locally. Consult a qualified expert to do so will be reset to the minimumsettingforthe where necessary. next charging process. You may then need If necessary, adjust your vehicle's settings. to reset the values of the maximum charge current. !Anexcessivechargecurrentcanblowa If the charge current values that have been fuse or lead to overheating of the external set on the charging cable and the on-board power supply. Check whether the external power supply is compatible with the set Z

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders